Metal additive manufacturing (AM) refers to any process of making 3D metal parts layer-
upon-layer via the interaction between a heating source and feeding material from a digital …

Remarkable residual stress is commonly present in metal components produced by laser
additive manufacturing due to the inherent rapid heating/cooling rate and high temperature …

Abstract Ti-6Al-4 V alloy when processed by laser powder bed fusion (LPBF) is a useful
material which can be used for the manufacture of complex 3D components for aerospace …

Martensitic transformation twinning including {111} α''type I,''{351}''< 2‾ 11> α''type II and
{021} α''twins, and extrinsic {111} α''stacking faults were investigated in a deformed body …

In this work, in-situ high temperature electron back-scatter diffraction (HT-EBSD) was
designed to investigate the phase transformation in Grade 1 commercially pure titanium (CP …

The creep behaviour of as-built additive-manufactured Ti-6Al-4V alloy was studied through
small punch creep test (SPCT) experiments at 450 and 500° C. The couple stress/minimum …

In this work, a bimodal grain structure was developed for commercial purity Ti (CP-Ti) via
powder metallurgy processing, followed by free hot forging and then heat treatment. The bi …

This study reports an unusual martensitic strain accommodation mechanism, in an electron
beam processed metastable β-Ti alloy, exhibiting a fine-grained microstructure with good …