Titanium alloy, an ideal aviation and biomedical material, is generally considered as a
typical difficult-to-cut material because of low elastic modulus and poor thermal conductivity …

In situ neutron diffraction experiments have been performed under loading in cast-wrought
(CW) and additively manufactured (AM) equiatomic CoCrNi medium-entropy alloys. The …

The residual stress reduction, the precipitation behavior of γ" phase and the evolution of
mechanical properties of Inconel 718 alloy in solid solution annealed with different …

Dislocation structures are ubiquitous in any 3D printed alloy and they play a primary role in
determining the mechanical response of an alloy. While it is understood that these structures …

The development of multi-principal element alloys is currently on the rise. While there is
significant fundamental work being performed to understand microstructure-property …

Abstract A dual phase (DP500/800) steel sheet (1.6 mm thickness) was evaluated by means
of low cycle fatigue (LCF). The fatigue properties of the material were assessed by means of …

Inconel 718 (IN718) nickel-based superalloy is widely used in aerospace and nuclear
applications owing to its excellent comprehensive mechanical properties, oxidation …

Austenitic stainless steels with a bimodal harmonic structure, in which the fine grain structure
(Shell) exists around the coarse grain structure (Core), are prepared by powder metallurgy …