To fulfill the need to limit automotive emissions, reducing vehicle weight is widely
recommended and achieved in many ways, both by the construction of individual elements …

The fact that the weld geometry is vital in the cooling rate and determining the weld metal
quality is obvious to all. So, the Taguchi technique was used to determine the process …

Metal inert gas (MIG) welding is widely employed for aluminum alloy welding, but high
residual stress, coarse grain's structure, porosity, and micro-cracks occur during MIG …

Many industries rely heavily on the availability and reliability of complex structural and
functional components to execute operations efficiently. However, failure of components …

The impact of interwire angle on the fluid dynamics and weld defects in tandem NG-GMAW
of 5083 Alsingle bondMg alloy was investigated through experimental and simulation …

In this study, the microstructural properties, wear resistance, and corrosion behavior of H111
hot-rolled AA5754 alloy before heat treatment, after homogenization, and after aging were …

The aim of this study is to enhance the performance and effectiveness of welding 5mm thick
plates with different groove designs and investigate their post-effects on material properties …

This work focuses on improvement of performance and effectiveness on welding 5 mm thick
plate with different filler metal and its post effects on the properties. The comparison of …

This study examines the impact of filler metal on the mechanical, microstructural and
corrosion properties of an aluminium alloy 5083-F welded employing tungsten inert gas …

To fulfil a need of limitation automotive emissions the reduction of vehicle weight is widely
recommended and achieved in many ways, both by the construction of individual elements …