One of the major problem in ultra-high-performance concrete (UHPC) after exposure to high-
temperatures is explosive spalling. Adding a single type of fibers alone is insufficient …

This paper provides a comprehensive review of calcium sulfate whiskers (CSW), focusing on
their synthesis methods, morphological characteristics, and diverse applications across …

Fibre-reinforced concrete (FRC) has been suggested as a feasible substitute for steel
reinforcement in tunnel lining segments. To enhance the flexural strength and toughness of …

Sustainable building construction requirements demand an efficient utilization of industrial
waste as alternatives to construction materials. In this work, the nano-silica (NS) has been …

Limestone is commonly used in cement concrete due to its unique nature and type. It has
physical effects (nucleation effect and dilution effect) and chemical effects on the hydration …

Fiber-reinforced concrete (FRC) with natural sand (NS) as fine aggregate has been
regarded as an favorable cementitious composites in engineering application due to its …

To solve the problem of tensile properties deterioration and explosive spalling of steel fiber
reinforced cementitious composites (ST/FRCC) subjected to high temperature. A high …

The increasing use of natural resources and pollution caused by construction industries has
spurred interest in eco-friendly materials such as recycled aggregates and recycled fibers …

Grouted rock bolts subject to axial loading in the field exhibit various failure modes, among
which the most predominant one is the bolt-grout interface failure. Thus, mechanical …

In this study, the mechanical properties and microstructure of basalt-brucite hybrid fiber
reinforced low heat cement concrete was explored. The results indicated that the …