The brittleness and work-softening of Bulk Metallic Glasses (BMGs) prevent their wide
applications as structural engineering materials. In order to settle this problem, the BMG …

Metallic glass composites (MGCs) containing crystals can display tensile ductility,
overcoming the catastrophic failure of bulk metallic glasses. However, MGCs containing …

The hybrid reinforcing structures, which contain Ta-rich particles, B2–CuZr and B19′-CuZr
phases, have been successfully introduced into a Zr-based metallic glass matrix by doping …

Hard β-Ta phase is generally produced during Ta film deposition. While in some cases, soft
α-Ta phase is preferred to ensure deformation capability. In this work, templated growth …

The addition of a small amount of oxygen improves the mechanical properties, especially
plasticity, of Ti 45.7 Zr 33 Ni 3 Cu 5.8 Be 12.5 amorphous alloy composites (AACs) at room …

Since single solid solution tends to form in medium-or high-entropy alloys (MEAs or HEAs), it
offers an opportunity to obtain shape-memory type bulk metallic glass (BMG) composites …

Twin-roll casting has been recently revealed to be an efficient technique to produce
rejuvenated metallic glass (MG) strips. Due to the high melting point and high hardness …

In this work, deformation behaviors of a CuZrAlNb bulk metallic glass composite (BMGC)
with different volume fractions of the crystalline phase were characterized using in-situ …

Transformation-induced plasticity is a fundamental solution for improving the ductility of bulk
metallic glass composites (BMGCs). However, the underlying mechanism remains …

Abstract Four Ti 53− x Zr 20 Nb 10 Cu 5 Be 12 Ag x (x= 0, 1, 3 and 5 at.%) bulk metallic glass
composites (BMGCs) with various size, volume fraction and morphology of in-situ crystal …