Recent developments in stainless steels
This article presents an overview of the developments in stainless steels made since the
1990s. Some of the new applications that involve the use of stainless steel are also …
1990s. Some of the new applications that involve the use of stainless steel are also …
The TRIP effect and its application in cold formable sheet steels
The Transformation‐Induced‐Plasticity (TRIP) effect is used for enhancing the formability of
cold formable sheet steels. While the first observation of this phenomenon dates back to the …
cold formable sheet steels. While the first observation of this phenomenon dates back to the …
Identification of microstructure factors affecting hydrogen embrittlement of a 2205 duplex stainless steel
W Wu, S Liu, W Li, J Li - Corrosion Science, 2022 - Elsevier
Indentation of key microstructure factors affecting hydrogen embrittlement (HE) of duplex
stainless steel (DSS) is fundamental for regulating the HE resistance. This study investigated …
stainless steel (DSS) is fundamental for regulating the HE resistance. This study investigated …
Study on the dynamic recrystallization model and mechanism of nuclear grade 316LN austenitic stainless steel
S Wang, M Zhang, H Wu, B Yang - Materials characterization, 2016 - Elsevier
In this study, the dynamic recrystallization behaviors of a nuclear grade 316LN austenitic
stainless steel were researched through hot compression experiment performed on a …
stainless steel were researched through hot compression experiment performed on a …
Temperature change induce crack mode transition of 316L stainless steel in H2S environment revealed by dislocation configurations
C Liu, J Liu, C Chen, H Yu - Corrosion Science, 2021 - Elsevier
The crack propagation mechanism of 316L austenitic stainless steel in the H 2 S
environment is revealed by dislocation configurations. Slow strain rate tensile test results …
environment is revealed by dislocation configurations. Slow strain rate tensile test results …
[HTML][HTML] A new nanoscale metastable iron phase in carbon steels
T Liu, D Zhang, Q Liu, Y Zheng, Y Su, X Zhao, J Yin… - Scientific reports, 2015 - nature.com
Metastable ω phase is common in body-centred cubic (bcc) metals and alloys, including
high-alloying steels. Recent theoretical calculations also suggest that the ω structure may …
high-alloying steels. Recent theoretical calculations also suggest that the ω structure may …
Comparison of critical plane models based on multiaxial low-cycle fatigue tests of 316L steel
An endurance against multiaxial fatigue of 316L steel is studied. A fatigue life curve of
torsional mode is substantially shifted to longer fatigue lives while tension/compression …
torsional mode is substantially shifted to longer fatigue lives while tension/compression …
Microstructure and martensitic transformation in 316L austenitic steel during multiaxial low cycle fatigue at room temperature
Austenitic stainless 316L steel in cold worked condition was subjected to torsional cyclic
loading with equivalent strain amplitudes of 0.3% and 0.4% and multiaxial (in-phase and out …
loading with equivalent strain amplitudes of 0.3% and 0.4% and multiaxial (in-phase and out …
Comparative assessment of strain-controlled fatigue performance of SS 316L at room and low temperatures
In the present study, strain-controlled low cycle fatigue (LCF) behaviour of SS 316L at room
temperature (RT) and− 80℃ were investigated. RT LCF specimens show cyclic softening …
temperature (RT) and− 80℃ were investigated. RT LCF specimens show cyclic softening …
Stability of austenitic 316L steel against martensite formation during cyclic straining
Solution-annealed AISI 316L steel was fatigued with constant plastic strain amplitudes at
room temperature and under various conditions at depressed temperatures down to 113K to …
room temperature and under various conditions at depressed temperatures down to 113K to …