In this paper, after a short review of the heat exchangers (HEX) types and applications with
different technologies was presented, a lot of parameters which mainly affect the thermal …

The development of innovative heat exchangers with improved heat transfer performance is
an important concern for heat transfer applications. The use of passive techniques such as …

The corrugated fin is one of the common fin types in plate-fin heat exchangers. The
corrugated fins can promote fluid turbulence and separate or destroy the boundary layer. To …

This review focuses on the thermal-hydraulic performance correlations for the air-side of
compact and microchannel heat exchangers. These correlations are presented in tables …

Flow around a circular cylinder has been experimentally studied at Reynolds numbers of
Re= 4× 10 3 and Re= 8× 10 3 using Particle Image Velocimetry (PIV). The Artificial Neural …

This study experimentally verified a new design of the bilateral unit of a PV/T photovoltaic-
thermal collector that utilises water and air as a coolant under weather conditions in Gödöllő …

Proton exchange membrane fuel cells are an ideal power source for modern energy
vehicles owing to their high efficiency, fast response, and zero emission. Because of the low …

Heat exchangers are used in air conditioners, heat pumps, marine, land and air vehicles,
refrigeration systems, thermal and nuclear power plants, etc. Increasing heat transfer …

The plain fin and circular tubes are generally used in heat exchangers of cooling systems.
Numerous studies aiming at enhancing the thermal and hydraulic performances of this type …

Abstract The three-dimensional (3D) fluid flow and heat transfer analysis and geometric
optimization of two rows circular and elliptic wavy fin and tube heat exchanger (FTHE) are …