… To study effect of the injection timing on power, experiments were performed at variable Start of Injection to achieve optimized combustion phasing when JP-8 was used. For all experi…
V Soloiu, R Gaubert, M Muinos, J Moncada, T Beyerl… - 2017 - sae.org
… Both efficiencies and exhaust emissions showed little to no change with the different fuel blends, suggesting that JP-8 and ULSD have comparable combustioncharacteristics. …
… The two diesel blends used in the current study were a commercial grade ultra-low-sulfur diesel (ULSD) #2 reference fuel, ULSD#2, and Fuels for Advanced Combustion Engines (FACE…
… utilize different fuels, such as ULSD and JP-8, which are crude oil … Thus, blendingJP-8 with synthetic fuels of low CN such as … and quantify the combustioncharacteristics of JP-8, and …
… Although the physical properties of JP-5 and JP-8 are similar, JP-5 has a higher flash point … Performance and emissioncharacteristics of blended biodiesel fuels with various injection …
… of liquid spray characteristics between biodiesel and ULSD is presented. Combustion gases … of conventional and synthetic alternative jet fuels and 50 volume percent of JP-8blended …
DL Prak, M Hamilton, R Banados, J Cowart - Fuel, 2022 - Elsevier
… This study investigates the physical properties and combustion behavior of blends of military jet … Comparisons of the combustion metrics of the current study with those of published JP-8 …
V Soloiu, J Moncada, M Muiños… - ASME Power …, 2017 - asmedigitalcollection.asme.org
… CTL20 (80% ULSD#2 (ultra-lowsulfurdiesel) blended with 20% … Combustion phased under single injection of JP-8 given a … for validation of combustioncharacteristics of both ULSD#2 …