Titanium alloy, an ideal aviation and biomedical material, is generally considered as a
typical difficult-to-cut material because of low elastic modulus and poor thermal conductivity …

The purpose of the present study is to investigate the effect of post heat treatment as well as
the manufacturing strategy on the microstructure evolution during martensite decomposition …

To study the influence of prior α 2 phase on O-phase formation kinetics in β matrix, different
isothermal heat treatments were performed at 876 and 780° C using an advanced Ti2AlNb …

The rapid development of the aerospace industry has led to a dramatic increase in the
demand for complex thin-walled structural parts made of titanium alloys. However, the huge …

The Ti-6Al-4V (TC4) alloy wheel hub has exhibited some defects that affect the properties
during the vertical centrifugal casting process. Therefore, the analysis of the solidification …

Laser powder bed fusion (LPBF) Ti-6Al-4V is widely studied for use in structural applications
in aerospace and medical industries, but mechanical anisotropy and microstructural …

The medium-entropy alloy Hf 20 Nb 10 Ti 35 Zr 35 has a ductile BCC structure in the as-
solution-treated state and could be age-hardening with fine precipitates. In this study, the …

The microstructure, phase composition and elemental composition in the α-and β-phases of
the two-phase wrought Ti-5.7 Al-1.6 V-3Mo titanium alloy at room temperature were studied …

Phase transformation kinetics were studied of Ti-575 titanium alloy during cooling from
solution annealing and subsequent ageing using in-situ high energy X-ray diffraction …

The effect of volume fractions of α phase and β phase on the microstructure evolution and
deformation mechanism of as-forged Ti–5Al–5Mo–5V–1Cr–1Fe alloy during in-situ tensile …