Cu 2 ZnSnS 4; commonly abbreviated as CZTS is a promising material for low cost thin film
solar cells, because of its suitable band gap energy of around 1.5 eV and large absorption …

Abstract Cu 2 ZnSnS 4 (CZTS) is considered a solar cell material alternative to CuInGaSe 2
(CIGS); they have almost the same performance; except for power conversion efficiency …

The development of kesterite Cu2ZnSn (S, Se) 4 thin‐film solar cells is currently hindered by
the large deficit of open‐circuit voltage (Voc), which results from the easy formation of CuZn …

Hao Xin, John K. Katahara, Ian L. Braly, and Hugh W. Hillhouse* selenization temperature to
obtain a 900 nm CZTSSe film with larger grain size. Upon full device processing on this film …

Abundant intrinsic defects and defect clusters in Cu2ZnSn (S, Se) 4 (CZTSSe) solar cells
lead to severe nonradiative recombination and limited photoelectric performance. Therefore …

This study represents the investigation of earth-abundant and non-toxic SnS absorber and
SnS 2 buffer layer materials by using a green solution process. Some physical properties of …

Copper chalcogenides (CuCh) have attracted considerable attention due to their promising
potential as environmental-friendly photoactive material for lightweight and flexible thin film …

Abstract Thin film photovoltaic Cu 2 ZnSnS 4 (copper zinc tin sulfide or CZTS) is one of the
most promising sustainable solar cell absorber material. The CZTS absorber layer …

Organic and inorganic materials such as perovskites, copper indium gallium diselenide,
cadmium telluride, and copper zinc tin sulfide/selenide (CZTS/Se) have been employed to …

In this study, effect of heating rate and sulfurization time on the properties of CZTS thin films
and their photovoltaic performances was investigated. CZTS layers were prepared by a two …