This work studies the effect of mechanical properties and microstructure on sliding wear and
cavitation erosion behaviors of cermet coatings deposited via high velocity oxy-fuel (HVOF) …

Simultaneously improved impact toughness and wear resistance of high Cr tool and die
steels (HCS) enable them to be widely used in the lightweight field. In this study, TiC+ TiB …

Owing to the poor self-diffusion coefficient of TiC, the mechanical and tribological properties
of the TiC matrix composites were difficult to improve simultaneously by adding …

A new route was provided to obtain the TiC matrix composite with the intragranular Al 2 O 3
using carbon fibers as carbon source by spark plasma sintering. The formation of the …

Iron-based metal matrix composites (IMMCs) have attracted significant research attention
due to their high specific stiffness and strength, making them potentially suitable for various …

Abstract Alloys of the Fe–Cr–C–B–Ti alloy system are characterized by brittleness, which
can be eliminated by the copper alloy, while corrosion resistance and abrasive wear …

Cast iron is widely used in engineering production and in the surface alloying of workpieces,
which is exploited to improve the properties of the material. Research on cast iron is still …

A new hardfacing alloy within the Fe-Ti-Nb-Mo-VC alloying system was utilized to restore the
working surfaces of cone crusher rotors using Flux-Cored Arc Welding (FCAW). TiC, NbC …

Purpose Regarding the broadening of the titanium alloy application field, the surface
treatment coating of TC4 alloy has become an essential global research topic. This study …

With the rapid increase of sand content in crude oil, erosion corrosion has gradually become
the key factor of pipeline failure, especially for the elbow. Therefore, in this paper, the …