Production of novel recycled hybrid metal matrix composites using optimized stir squeeze casting technique
In this work, optimized squeeze stir casting was used to produce recycled Aluminum Metal
Matrix Composites (AMC's). Scrap Aluminum Alloy Wheel (SAAW), sourced from the local …
Matrix Composites (AMC's). Scrap Aluminum Alloy Wheel (SAAW), sourced from the local …
[HTML][HTML] Production of Al6061 matrix composites with ZrO2 ceramic reinforcement using a low-cost stir casting technique: Microstructure, mechanical properties, and …
Abstract The Al6061/ZrO 2 composites were produced using a low-cost stir casting
technique, for the first time. The microstructures, mechanical properties, and electrochemical …
technique, for the first time. The microstructures, mechanical properties, and electrochemical …
Mechanical and Tribological Behaviour of Al-ZrO2 Composites: A Review
Aluminium metal matrix composites (AMCs) reinforced with hard ceramics are highly
demanded composites which have the potential of fulfilling the current demands of …
demanded composites which have the potential of fulfilling the current demands of …
Towards sustainable automobiles-advancements and challenges
The growing energy demands and the negative ecological impact of the industrialisation
have led to increased focus towards sustainability. This paper presents different strategies …
have led to increased focus towards sustainability. This paper presents different strategies …
Microhardness studies on stir cast AA7075-Si3N4 based composites
In this paper the effect of silicon nitride reinforcement on microhardness on AA7075-Si3N4
has been studied. Five different samples with varying weight percentage (0, 2, 4, 6, and 8) of …
has been studied. Five different samples with varying weight percentage (0, 2, 4, 6, and 8) of …
Tribological Analysis of Squeeze Stir Cast Recycled Aluminum MMC's
J Victor Christy, AHI Mourad… - Pressure Vessels …, 2021 - asmedigitalcollection.asme.org
In this work, squeeze stir casting was used to produce recycled Aluminum Metal Matrix
Composites (MMC's) plates. Scrap Aluminum Alloy Wheel (SAAW) was used as a matrix and …
Composites (MMC's) plates. Scrap Aluminum Alloy Wheel (SAAW) was used as a matrix and …
Characterization of wear rate of Al-12 wt% Si alloy based MMC reinforced with ZrO2 particulates
M Nataraja, G Balakumar, N Santhosh… - Materials Research …, 2024 - iopscience.iop.org
The primary objective of this study is to fabricate an Al-12 wt% Si Alloy/ZrO 2 composite
using the Stir Casting technique, with a specific focus on assessing its performance …
using the Stir Casting technique, with a specific focus on assessing its performance …
Fabrication and mechanical characterization of AA2024-ZrO2-Gr hybrid composite
The increasing industrial needs for lightweight materials have led to the development of new
composites with better mechanical properties. In this work a novel hybrid composite has …
composites with better mechanical properties. In this work a novel hybrid composite has …
Friction stir welding of hybrid recycled metal matrix composites
JV Christy, AH Ismail Mourad - Pressure Vessels …, 2022 - asmedigitalcollection.asme.org
In this work, conventional Friction Stir Welding (FSW) was used to investigate the weldability
of recycled hybrid Aluminum Matrix Composites (AMCs). The novel composites were …
of recycled hybrid Aluminum Matrix Composites (AMCs). The novel composites were …
Influence of Si3N4 on micro structural, mechanical and physical features of Al-7175 based vacuum assisted bottom stir cast composites
Through this research paper, the influence of silicon nitride (Si3N4) particles incorporated
with Al 7175 have been studied and reported for mechanical and physical behaviors …
with Al 7175 have been studied and reported for mechanical and physical behaviors …