A comparison of four numerical modeling approaches for enhanced shell-and-tube heat exchangers with experimental validation
In the present paper, 3-D numerical simulations of a rod-baffle shell-and-tube heat
exchanger with four different modeling approaches are developed and validated with …
exchanger with four different modeling approaches are developed and validated with …
Heat transfer correlations for single-phase flow in plate heat exchangers based on experimental data
In the present paper, the single-phase heat transfer for nine brazed-plate heat exchangers
with different geometric parameters is experimentally investigated. An ethylene glycol and …
with different geometric parameters is experimentally investigated. An ethylene glycol and …
Assessing the influence of four bonding methods on the thermal contact resistance of open-cell aluminum foam
P De Jaeger, C T'Joen, H Huisseune, B Ameel… - International journal of …, 2012 - Elsevier
A thermal application of open-cell aluminum foam typically requires it to be bonded on a
substrate. The resulting thermal contact resistance is investigated for four bonding methods …
substrate. The resulting thermal contact resistance is investigated for four bonding methods …
Thermal hydraulic performance of 10 PPI aluminium foam as alternative for louvered fins in an HVAC heat exchanger
S De Schampheleire, P De Jaeger, H Huisseune… - Applied Thermal …, 2013 - Elsevier
In this paper, two heat exchangers for an HVAC application are compared. The first one is a
commercially available high quality louvered fin heat exchanger, while the second heat …
commercially available high quality louvered fin heat exchanger, while the second heat …
Air-side heat-transfer enhancement by a new winglet-type vortex generator array in a plain-fin round-tube heat exchanger
The impact of a vortex-generation technique for air-side heat-transfer improvement is
experimentally investigated through full-scale wind-tunnel testing of a plain-fin round-tube …
experimentally investigated through full-scale wind-tunnel testing of a plain-fin round-tube …
Model-based sensor data fusion of quasi-redundant voltage and current measurements in a lithium-ion battery module
D Schneider, U Vögele, C Endisch - Journal of Power Sources, 2019 - Elsevier
In recent years, battery monitoring systems on cell level have been introduced. These
architectures frequently employ current and voltage sensors at each battery cell. In this work …
architectures frequently employ current and voltage sensors at each battery cell. In this work …
Effect of inclination on pressure drop and flow regimes in large flattened-tube steam condensers
This paper presents an experimental study of the inclination effect on pressure drop and flow
regime during condensation of steam in a large flattened tube used in air-cooled …
regime during condensation of steam in a large flattened tube used in air-cooled …
Assessing the influence of four cutting methods on the thermal contact resistance of open-cell aluminum foam
P De Jaeger, C T'Joen, H Huisseune, B Ameel… - International journal of …, 2012 - Elsevier
The application of open-cell aluminum foam often involves a cutting operation to the desired
shape and dimensions. Depending on the applied cutting method, this operation can result …
shape and dimensions. Depending on the applied cutting method, this operation can result …
Performance analysis of a compound heat exchanger by screening its design parameters
H Huisseune, C T'Joen, P De Jaeger, B Ameel… - Applied Thermal …, 2013 - Elsevier
Manufacturers of heat exchangers are continuously searching for new and better designs. A
promising approach is to combine known enhancement techniques, resulting in so-called …
promising approach is to combine known enhancement techniques, resulting in so-called …
Simultaneous heat and mass transfer to air from a compact heat exchanger with water spray precooling and surface deluge cooling
Various methods are available to enhance heat exchanger performance with evaporative
cooling. In this study, evaporative mist precooling, deluge cooling, and combined cooling …
cooling. In this study, evaporative mist precooling, deluge cooling, and combined cooling …