Laves phases with their comparably simple crystal structure are very common intermetallic
phases and can be formed from element combinations all over the periodic table resulting in …

Heat-resistant materials, applied to manufacturing high-temperature components, are pivotal
for raising the steam temperature parameters of advanced ultra-supercritical power plants …

We study the nucleation of Mo-rich Laves phase particles during aging and creep of 12 wt.%
Cr tempered martensite ferritic steels (TMFS). Recently, in Isik et al.(2014) we reported that …

G115 steel has gained a growing interesting recently for its use in next-generation ultra-
supercritical power plant applications. Due to the high densities of dislocations and lath …

This paper reports on the formation of an Mo-rich Laves phase during high-temperature
exposure and creep of a tempered martensite ferritic steel with 12 wt.% Cr and 1 wt.% Mo …

Microstructure and hardness in the grip and gage sections of ruptured 3% Со modified P92
steel specimens were examined after creep tests under applied stresses ranging from 200 to …

Castable alumina forming austenitic (AFA) alloys have demonstrated superior creep life and
oxidation resistance at temperatures exceeding 800⁰C. Despite the success in the …

The precipitation of the Laves-phase in a low-carbon 9% Cr heat resistant steel was studied
under conditions of aging and creep at 923 K. The Laves-phase of Fe 2 (W, Mo)-type with a …

In view of developing novel alloys for applications in advanced Generation IV lead-cooled
fast reactor (LFR) fuel cladding materials, four 9Cr ferrite/martensite (F/M) heat resistant …

Abstract In this study, Cu-0.26 Cr-0.14 Mg and Cu-0.26 Cr-0.14 Mg-0.02 Si (wt.%, nominal
composition) alloys were used to study the effect of adding a small amount of Si on the …