Review of flexible supercapacitors using carbon nanotube-based electrodes
Carbon nanotube (CNT)-based electrodes in flexible supercapacitors have received
significant attention in recent years. Carbon nanotube fiber fabrics (CNT-FF) have emerged …
significant attention in recent years. Carbon nanotube fiber fabrics (CNT-FF) have emerged …
On the advances of computational nonclassical continuum theories of elasticity for bending analyses of small-sized plate-based structures: a review
Nonclassical continuum theories of elasticity (NCTE) have been extensively used in the
mechanical analyses of small-sized structures due to their effective and tremendous ability …
mechanical analyses of small-sized structures due to their effective and tremendous ability …
Free vibration investigation on RVE of proposed honeycomb sandwich beam and material selection optimization
In this paper, free vibration, modal and stress state analyses of honeycomb sandwich
structures with different boundary conditions was investigated and major factors affecting the …
structures with different boundary conditions was investigated and major factors affecting the …
Chaotic discrete breathers in bcc lattice
ID Kolesnikov, SA Shcherbinin, YV Bebikhov… - Chaos, Solitons & …, 2024 - Elsevier
It is well known that a modulationally unstable short-wavelength delocalized nonlinear
vibrational mode (DNVM) can create chaotic discrete breathers (DBs) in a nonlinear lattice …
vibrational mode (DNVM) can create chaotic discrete breathers (DBs) in a nonlinear lattice …
Electro-mechanical response of stretchable pdms composites with a hybrid filler system
H Kim, N Qaiser, B Hwang - Facta Universitatis, Series …, 2023 - casopisi.junis.ni.ac.rs
With the technological development of wearable devices, there are increasing demands for
stretchable conductor that have stable electro-mechanical performance. In this study, a …
stretchable conductor that have stable electro-mechanical performance. In this study, a …
Thermal buckling and bending analyses of carbon foam beams sandwiched by composite faces under axial compression
The bending and critical buckling loads of a sandwich beam structure subjected to thermal
load and axial compression were simulated and temperature distribution across sandwich …
load and axial compression were simulated and temperature distribution across sandwich …
Prediction and optimization of 3D-printed sandwich beams with chiral cores
S Kamarian, A Khalvandi, E Heidarizadi… - International Journal of …, 2024 - Elsevier
This study pursues two primary objectives concerning sandwich structures with chiral cores.
Firstly, it delves into the realm of machine learning-assisted predictions regarding the …
Firstly, it delves into the realm of machine learning-assisted predictions regarding the …
Thermomechanical behavior of functionally graded nanoscale beams under fractional heat transfer model with a two-parameter Mittag-Leffler function
In this research, a new fractional framework for the non-Fourier thermal conductivity theory
has been developed and analyzed in detail. Furthermore, a dual-phase-lag (DPL) model is …
has been developed and analyzed in detail. Furthermore, a dual-phase-lag (DPL) model is …
A molecular dynamics simulation to shed light on the mechanical alloying of an Al-Zr alloy induced by severe plastic deformation
In a recent experimental work, as a result of severe plastic deformation, a non-equilibrium
solid solution was obtained despite the very limited solubility of zirconium (Zr) in aluminum …
solid solution was obtained despite the very limited solubility of zirconium (Zr) in aluminum …
An experimental and metamodeling approach to tensile properties of natural fibers composites
The present work presents an analysis of the tensile properties of Palm as well as Luffa
natural fiber composites (NFC) in high density polyethylene (HDPE), polypropylene (PP) …
natural fiber composites (NFC) in high density polyethylene (HDPE), polypropylene (PP) …