A new and economic approach to fabricate resistant porous membrane supports using kaolin and CaCO3

A Harabi, F Zenikheri, B Boudaira, F Bouzerara… - Journal of the European …, 2014 - Elsevier
This new and economic approach to fabricate resistant porous membrane supports consists
of Algerian kaolin and calcite (CaCO 3) instead of Al 2 O 3. The porous mullite (3Al 2 O 3 …

Recycling of lime mud and fly ash for fabrication of anorthite ceramic at low sintering temperature

J Qin, C Cui, X Cui, A Hussain, C Yang, S Yang - Ceramics International, 2015 - Elsevier
Lime mud is a kind of waste generated during causticization reaction of an alkali recycling
process in paper industry. Lime mud and fly ash were reused as raw materials to fabricate …

Development and characterization of tubular composite ceramic membranes using natural alumino-silicates for microfiltration applications

B Ghouil, A Harabi, F Bouzerara, B Boudaira… - Materials …, 2015 - Elsevier
The preparation and characterization of porous tubular ceramic composite microfiltration
membranes, using kaolins and calcium carbonates, were reported. The porous gehlenite …

Anorthite-cordierite based binary ceramics from coal fly ash and steel slag for thermal and dielectric applications

K Tabit, M Waqif, L Saâdi - Materials Chemistry and Physics, 2020 - Elsevier
Studying the effects of cordierite crystallization with the anorthite phase, by benefiting from
its high mechanical strength and good thermal performance, can hold promise for more …

Fabrication and characterization of anorthite-based ceramic using mineral raw materials

X Cheng, S Ke, Q Wang, H Wang, A Shui, P Liu - Ceramics International, 2012 - Elsevier
The purpose of this study is to design a novel single crystalline phase ceramic based on
anorthite whose properties fulfill the tableware market requirements such as high …

Utilization of recycled paper processing residues and clay of different sources for the production of porous anorthite ceramics

M Sutcu, S Akkurt - Journal of the european ceramic society, 2010 - Elsevier
Production of porous anorthite ceramics from mixtures of paper processing residues and
three different clays are investigated. Suitability of three different clays such as enriched …

Binder jetting advanced ceramics for metal-ceramic composite structures

DA Snelling, CB Williams, CTA Suchicital… - … International Journal of …, 2017 - Springer
Abstract Metal Matrix Composites (MMCs) are a class of materials combining two dissimilar
materials (eg, metal & ceramic) that when combined, provide unique properties including …

Preparation and characterization of membrane supports for microfiltration and ultrafiltration using kaolin (DD2) and CaCO3

B Boudaira, A Harabi, F Bouzerara… - … and Water Treatment, 2016 - Taylor & Francis
The ceramic products are extremely interesting in the field of the membrane supports
because of their mechanical resistance, chemical inertia, long working life, and thermal …

[HTML][HTML] Mechanical properties of anorthite based ceramics prepared from kaolin DD2 and calcite

A Harabi, S Zaiou, A Guechi, L Foughali, E Harabi… - Cerâmica, 2017 - SciELO Brasil
Good quality ceramics costs a lot that has limited their use in developing countries. This
work was devoted to prepare low-cost and good quality anorthite based ceramics. The …

Preparation of anorthite ceramics using SPS

Š Csáki, F Lukáč, T Húlan, J Veverka… - Journal of the European …, 2021 - Elsevier
A mixture of kaolin (92 wt.% of kaolinite) and laboratory-grade CaCO 3 was used for
anorthite preparation using the spark plasma sintering (SPS) technique. The powder was …