Effect of source materials, additives on the mechanical properties and durability of fly ash and fly ash-slag geopolymer mortar: A review

SK John, Y Nadir, K Girija - Construction and Building Materials, 2021 - Elsevier
Geopolymer is a sub-class of alkali activated materials composed of base materials
containing aluminosilicates which can be used for construction with reduced environmental …

[HTML][HTML] A review on mixture design methods for geopolymer concrete

N Li, C Shi, Z Zhang, H Wang, Y Liu - Composites Part B: Engineering, 2019 - Elsevier
Geopolymer concretes (GPCs) can be produced by chemical activation of industrial by-
products and processed natural minerals that contain aluminosilicate. There have been a …

Mechanical and durability properties of natural fiber-reinforced geopolymers containing lead smelter slag and waste glass sand

A Gholampour, A Danish, T Ozbakkaloglu… - … and Building Materials, 2022 - Elsevier
Owing to the low tensile properties of concrete, the use of internal fibers received significant
attention in concrete production. In recent years, using renewable and eco-friendly natural …

Physical-mechanical properties of fly ash/GGBFS geopolymer composites with recycled aggregates

Y Hu, Z Tang, W Li, Y Li, VWY Tam - Construction and Building Materials, 2019 - Elsevier
The properties of fly ash and ground granulated blast furnace slag (GGBFS) combination
based geopolymer composites containing recycled aggregate are investigated in this study …

Optimum mix design of geopolymer pastes and concretes cured in ambient condition based on compressive strength, setting time and workability

MNS Hadi, H Zhang, S Parkinson - Journal of Building engineering, 2019 - Elsevier
In this study, the effects of ground granulated blast furnace slag (GGBFS) content, alkaline
solution to binder (Al/Bi) mass ratio, sodium silicate solution to sodium hydroxide solution …

[HTML][HTML] Effect of slag on the mechanical properties and bond strength of fly ash-based engineered geopolymer composites

Y Ling, K Wang, W Li, G Shi, P Lu - Composites Part B: Engineering, 2019 - Elsevier
Recently, the concept of engineered cementitious composites (ECCs) has been extended to
the creation of engineered geopolymer composites (EGCs). Although showing similar …

Development and characterization of ceramic waste powder-slag blended geopolymer concrete designed using Taguchi method

P Chokkalingam, H El-Hassan, A El-Dieb… - Construction and Building …, 2022 - Elsevier
The ability to utilize industrial by-products in the production of cement-free geopolymer
concrete is a promising technology. However, the development, characterization, and …

Effect of Single and Synergistic Reinforcement of PVA Fiber and Nano-SiO2 on Workability and Compressive Strength of Geopolymer Composites

P Zhang, S Wei, Y Zheng, F Wang, S Hu - Polymers, 2022 - mdpi.com
Geopolymer composites can be used as a proper substitute for ordinary Portland cement,
which can reduce carbon dioxide (CO2) emissions and make rational use of industrial …

[HTML][HTML] Investigation on dynamic mechanical properties of fly ash/slag-based geopolymeric recycled aggregate concrete

Z Tang, W Li, VWY Tam, Z Luo - Composites Part B: Engineering, 2020 - Elsevier
By harnessing the benefits from both construction and demolition waste recycling and
geopolymer binders, geopolymeric recycled aggregate concrete (GRAC) can contribute to …

Exemplification of sustainable sodium silicate waste sediments as coarse aggregates in the performance evaluation of geopolymer concrete

B Kanagaraj, N Anand, UJ Alengaram, RS Raj… - … and Building Materials, 2022 - Elsevier
This investigation presents the experimental studies on mechanical properties of
geopolymer concrete (GPC) developed with the addition of sodium silicate waste sediments …