The need for high performance materials in aerospace, automotive and industrial
components operating at temperatures in the range of 1100–1500° C has led to a surge in …

Alloying is an important measure to improve the oxidation resistance of MoSi 2. Cr-modified
MoSi 2 composites were prepared by hot pressing sintering in this study, and their oxidation …

The aim of this work was to study the kinetics and oxidation mechanism of MoSi 2-MoB SHS-
ceramics in the temperature range of 600–1200° C. Due to the low rate of change in the …

This monograph is based on the fundamental aspects as well as the results of decades of
research related to structure, processing, mechanical properties, and resistance to …

The oxidation of a Mo (Si, Al) 2 composite is investigated at 1500° C in dry air using
exposure times from 1 to 1000 h. Cross sections are examined with Scanning Electron …

Reflecting the many changes in the field since the publication of the second edition,
Corrosion of Ceramic Materials, Third Edition incorporates more information on bioceramics …

Mo–Si and Mo–Si–Al alloy coatings were synthesized on the surface of nickel-based
superalloy substrate using electro-thermal explosion ultrahigh speed spraying technology …

MoSi2-0, 15.3, 22, and 29.3 at.% Al coatings were prepared on the nickel-based super-alloy
substrates by electro-thermal explosion ultrahigh speed spraying technology. The analysis …

This research investigated the impact of Cr content on the properties of (Mo, Cr) Si2
composites. Composites with CrSi2 molar fractions ranging from 0% to 10% were fabricated …

The feedstock powder of Mo (Si, Al) 2 (33.3 Mo, 40.0 Si, 26.7 Al, at.%) with dominant C40
phase was prepared by self-propagating high-temperature synthesis and induction plasma …