A review of the use of stainless steel for masonry repair and reinforcement
This paper focuses on the recent evolution of the utilization of stainless steel profiles for
repair and reinforcement of historic masonry structures, which are often subjected to …
repair and reinforcement of historic masonry structures, which are often subjected to …
In-plane and out-of-plane testing of unreinforced masonry walls strengthened using polymer textile reinforced mortar
Details of an experimental program investigating the structural performance of unreinforced
masonry (URM) walls strengthened using two different types of polymer textile reinforced …
masonry (URM) walls strengthened using two different types of polymer textile reinforced …
Performance of coconut coir reinforced hydraulic cement mortar for surface plastering application
N Sathiparan, MN Rupasinghe… - Construction and Building …, 2017 - Elsevier
This study was to investigate the effect of coconut coir on the strength and durability
properties of cement-lime surface plaster mortar. The purpose of adding coconut coir into the …
properties of cement-lime surface plaster mortar. The purpose of adding coconut coir into the …
Out-of-plane behavior of stone masonry walls: Experimental and numerical analysis
H Maccarini, G Vasconcelos, H Rodrigues… - … and Building Materials, 2018 - Elsevier
Aiming at contributing to the better understanding of the out-of-plane behavior of
unreinforced stone masonry structures, this paper presents the results of an experimental …
unreinforced stone masonry structures, this paper presents the results of an experimental …
In-plane lateral cyclic behaviour of lime-mortar and clay-brick masonry walls in dry and wet conditions
This paper presents an experimental investigation into the structural and material response
of ambient-dry and wet clay-brick/lime-mortar masonry elements. In addition to cyclic tests …
of ambient-dry and wet clay-brick/lime-mortar masonry elements. In addition to cyclic tests …
Pseudo-static cyclic loading comparison of reinforced masonry walls strengthened with FRCM or NSM FRP
Fiber reinforced polymer (FRP) composites have demonstrated poor performance in high
temperature environments where the glass transition temperature of the resin is exceeded …
temperature environments where the glass transition temperature of the resin is exceeded …
Experimental investigation of out-of-plane behaviour of URM wallettes strengthened using welded wire mesh
P Padalu, Y Singh, S Das - Construction and Building Materials, 2018 - Elsevier
This paper presents an experimental study on unreinforced masonry (URM) wallettes
strengthened using welded wire mesh (WWM) reinforcement. A total of 8 URM and 28 …
strengthened using welded wire mesh (WWM) reinforcement. A total of 8 URM and 28 …
Compressive properties of traditional brick masonry with crack reinforced with GFRP bars embedded in the horizontal mortar joint
Q Xie, W Hao, Y Zhang, D Xu - Journal of Building Engineering, 2023 - Elsevier
Cracking is a common damage form of historical masonry buildings, which has negative
effect on its mechanical properties. To improve the compressive properties of historical …
effect on its mechanical properties. To improve the compressive properties of historical …
[HTML][HTML] Cyclic behavior of masonry walls retrofitted with post-installed twisted bars or bonded rebars
The damage observed after the recent earthquakes showed that the most common failures
for masonry buildings involve out-of-plane mechanisms associated to the ineffective …
for masonry buildings involve out-of-plane mechanisms associated to the ineffective …
[HTML][HTML] Unconfined bond stress and slip characteristics of steel bars embedded in masonry cement mortars
Reinforcing bars are often embedded into cement mortar layers (bed joints and surface
bonded) of masonry structures to enhance their structural performance to various effects …
bonded) of masonry structures to enhance their structural performance to various effects …