The microstructural and stress evolution in sputter deposited Ni thin films
We report the stress and microstructural evolution for a series of Ni thin films sputter
deposited over a range of rates (0.076 and 0.250 nm/s), pressures (0.27, 0.67 and 1.33 Pa) …
deposited over a range of rates (0.076 and 0.250 nm/s), pressures (0.27, 0.67 and 1.33 Pa) …
Tailoring the mechanical properties of sputter deposited nanotwinned nickel-molybdenum-tungsten films
Advanced metallic alloys are attractive in microelectromechanical systems (MEMS)
applications that require high density, electrical and thermal conductivity, strength, and …
applications that require high density, electrical and thermal conductivity, strength, and …
Nanocrystalline grain boundary engineering: Increasing Σ3 boundary fraction in pure Ni with thermomechanical treatments
Grain boundary networks should play a dominant role in determining the mechanical
properties of nanocrystalline metals. However, these networks are difficult to characterize …
properties of nanocrystalline metals. However, these networks are difficult to characterize …
Properties of ultra-thin Cu films grown by high power pulsed magnetron sputtering
AA Solovyev, VA Semenov, VO Oskirko, KV Oskomov… - Thin Solid Films, 2017 - Elsevier
Because of the superior properties of copper, it has been of great interest as a conducting
material to replace Al in device manufacturing and Ag in multilayer low-emission coatings. In …
material to replace Al in device manufacturing and Ag in multilayer low-emission coatings. In …
Temperature‐driven perturbations in growth kinetics, structural and optical properties of NiO thin films
Nickel (II) oxide (NiO) is an emerging transparent semiconducting oxide with potential
applications in modern‐world ultraviolet active solar cells and visible‐blind photodetectors …
applications in modern‐world ultraviolet active solar cells and visible‐blind photodetectors …
Ultrasensitive Strain Sensors Based on Cu‐Al Alloy Films with Voided Cluster Boundaries
X Wu, H Chen, X Luo, D Wang… - Advanced Materials …, 2021 - Wiley Online Library
Stimulated by the requirement for wearable electronics, crack‐based strain sensors made
from polymer‐supported metal films have been reported as a prospective structure for …
from polymer‐supported metal films have been reported as a prospective structure for …
Nickel-based bilayer thin-film anodes for low-temperature solid oxide fuel cells
In this study, we investigate the possibility of using Ni-based anodes as alternatives to the Pt-
based anodes for thin-film solid oxide fuel cells (SOFCs) operating at low temperatures …
based anodes for thin-film solid oxide fuel cells (SOFCs) operating at low temperatures …
Effect of low and high heating rates on reaction path of Ni (V)/Al multilayer
The effect of heating rates of Ni (V)/Al NanoFoils® was investigated with transmission
electron microscopy (TEM). The Ni (V)/Al were subjected to heating by using differential …
electron microscopy (TEM). The Ni (V)/Al were subjected to heating by using differential …
Thickness-related variation in the structure, morphology and optical characteristics of nickel thin films for neutral density filtering
M Yadav, S Yadav, A Shankar, R Bala, M Rani - Physica Scripta, 2024 - iopscience.iop.org
In this paper we fabricate neutral density filter (NDF) for the visible region on the Borosilicate
glass substrate at room tempreature. E-Beam coating unit is used for fabrication of Nickel …
glass substrate at room tempreature. E-Beam coating unit is used for fabrication of Nickel …
Fabrication of ultrashort sub-meter-radius x-ray mirrors using dynamic stencil deposition with figure correction
T Shimamura, Y Takeo, T Kimura, F Perrin… - Review of Scientific …, 2023 - pubs.aip.org
This paper presents nanometer-scale production and metrology methods for elliptic-
cylindrical x-ray mirrors with an unprecedentedly small tangential radius of curvature of 160 …
cylindrical x-ray mirrors with an unprecedentedly small tangential radius of curvature of 160 …