Design of low phase noise VCO considering C/L ratio of LC resonator in 0.18-μm CMOS technology
A voltage-controlled oscillator (VCO) is usually designed by maximizing the quality (Q-)
factor of the LC-tank resonator to realize a low phase noise. For the same frequency, the …
factor of the LC-tank resonator to realize a low phase noise. For the same frequency, the …
On-Chip Millimeter-Wave DGS Based Bandstop Filter in 0.18-μm CMOS Process
Defected Ground Structure (DGS) based on-chip bandstop filter (BSF) design is proposed
for millimeter-wave applications. In the proposed structure, a capacitively loaded T-shape …
for millimeter-wave applications. In the proposed structure, a capacitively loaded T-shape …
Analysis and Implementation of High-Q CT Inductor for Compact and Wide- Tuning Range Ku-Band VCO
This work presents a new structure of center tap (CT) inductor to improve the performance of
Ku-band voltage-controlled oscillators (VCOs). Conventional CT inductor provided by the …
Ku-band voltage-controlled oscillators (VCOs). Conventional CT inductor provided by the …
Utilization of Multi-Resonant Defected Ground Structure Resonators in the Oscillator Feedback for Phase Noise Reduction of K-Band VCOs in 0.18- m CMOS …
This work proposes a new theory to reduce the phase noise of K-band Voltage-Controlled
Oscillators (VCOs) in Complementary Metal Oxide Semiconductor (CMOS) process by …
Oscillators (VCOs) in Complementary Metal Oxide Semiconductor (CMOS) process by …
A K-band VCO employing high active Q-factor defected ground structure resonator in 0.18 pm CMOS technology
In this paper, a new theory to improve the phase noise of a Voltage-Controlled Oscillator
(VCO) utilizing dual series and parallel resonance to improve the susceptance slope …
(VCO) utilizing dual series and parallel resonance to improve the susceptance slope …
A −192.7-dBc/Hz FoM -Band VCO Using a DGS Resonator With a High-Band Transmission Pole in 0.18- m CMOS Technology
This letter presents the improvement of the phase noise (PN) of a voltage-controlled
oscillator (VCO) by using a defected ground structure (DGS) resonator with a high-band …
oscillator (VCO) by using a defected ground structure (DGS) resonator with a high-band …
Design of a K-Band VCO Implementing T-Type LC Network in 0.18-μm CMOS Technology
N Jahan, RK Pokharel - IEEE Microwave and Wireless …, 2023 - ieeexplore.ieee.org
A symmetrical T-type LC network is presented to design a low-noise quasi-millimeter-wave
voltage-controlled oscillator (VCO) for the first time. For the same value of inductance, the T …
voltage-controlled oscillator (VCO) for the first time. For the same value of inductance, the T …
An integrated spiral DGS and an open stub meander-line resonator in the 0.13-µm BiCMOS technology for a 18-GHz band oscillator
In this paper, an 18 GHz voltage-controlled oscillator (VCO) with improved phase noise (PN)
and smaller size is proposed. The filter consists of an open stub resonator and an integrated …
and smaller size is proposed. The filter consists of an open stub resonator and an integrated …
Compact and low phase noise LC‐VCO design using novel V‐shaped inductor in 0.18‐μm CMOS technology for Ku‐band applications
An innovative, high‐quality factor, and small‐area V‐shaped inductor is presented in this
article to improve the performance of voltage‐controlled oscillators (VCOs). The differential …
article to improve the performance of voltage‐controlled oscillators (VCOs). The differential …
Analysis and application of dual series resonances for low phase noise K-band VCO design in 0.18-μm CMOS technology
This work proposes a new theory to improve the phase noise of a Voltage-Controlled
Oscillator (VCO) by introducing dual series resonances around the parallel resonance of an …
Oscillator (VCO) by introducing dual series resonances around the parallel resonance of an …