[HTML][HTML] Anisotropy in microstructure and shear properties of TA2/Q235 explosive welding interfaces
Q Zhou, H Lu, X Lan, Y Guo, K Liu, G Huang… - journal of materials …, 2023 - Elsevier
Explosive welding interface commonly show wavy shapes, makes microstructure
anisotropic. The effects of microstructure and different loading directions on shear properties …
anisotropic. The effects of microstructure and different loading directions on shear properties …
Coupling effects of temperature and strain rate on the mechanical behavior and microstructure evolution of a powder-plasma-arc additive manufactured high-entropy …
J Wang, H Guo, Z Jiao, D Zhao, X Chen, S Ma, T Zhang… - Acta Materialia, 2024 - Elsevier
A single-phase or simple-structured alloy does not always possess outstanding
combinations of strength and ductility over a wide range of temperatures and strain rates for …
combinations of strength and ductility over a wide range of temperatures and strain rates for …
Effect of Sn addition on the deformation behavior and microstructural evolution of Mg-Gd-Y-Zr alloy during hot compression
Q Zhang, Q Li, X Chen, J Bao, Z Chen - Materials Science and Engineering …, 2021 - Elsevier
We have studied the microstructure evolution and deformation behavior of Mg-5Gd-3Y-(1Sn)-
0.5 Zr alloys during hot compression (T= 350° C, 400° C, 450° C and 500° C, ε˙= 0.002 s− 1 …
0.5 Zr alloys during hot compression (T= 350° C, 400° C, 450° C and 500° C, ε˙= 0.002 s− 1 …
Dynamic tensile mechanisms and constitutive relationship in CrFeNi medium entropy alloys at room and cryogenic temperatures
Harsh service conditions in aerospace, defense and military, and other fields are calling for
materials with excellent mechanical properties to undergo extreme deformation (such as …
materials with excellent mechanical properties to undergo extreme deformation (such as …
[HTML][HTML] Counterexample-trained neural network model of rate and temperature dependent hardening with dynamic strain aging
Constitutive models dealing with the thermal and visco-plasticity of metals have seen wide
applications in the automotive industry. A basic plasticity and fracture characterization of a …
applications in the automotive industry. A basic plasticity and fracture characterization of a …
[HTML][HTML] Dynamic strain ageing in an AlMg alloy at different strain rates and temperatures: Experiments and constitutive modelling
Uniaxial tension tests at strain rates from 10− 4 to 10− 1 s− 1 and temperatures from 298 to
418 K are performed to study the dynamic strain ageing (DSA) of an AA5182-O sheet. Digital …
418 K are performed to study the dynamic strain ageing (DSA) of an AA5182-O sheet. Digital …
Influence of process parameters and heat treatments on the microstructures and dynamic mechanical behaviors of Inconel 718 superalloy manufactured by laser …
K Yuan, W Guo, P Li, J Wang, Y Su, X Lin… - Materials Science and …, 2018 - Elsevier
To achieve high-performance nickel-based superalloys by laser metal deposition (LMD)
technology for applications in aeroengines, we prepared Inconel 718 superalloys by LMD …
technology for applications in aeroengines, we prepared Inconel 718 superalloys by LMD …
[HTML][HTML] On the spatio-temporal characteristics of the Portevin-Le Chatelier effect in aluminium alloy AA5182: an experimental and numerical study
J Xu, OS Hopperstad, B Holmedal, T Berstad… - International Journal of …, 2023 - Elsevier
Abstract The Portevin–Le Chatelier (PLC) effect and its spatio-temporal characteristics in the
aluminium alloy AA5182 are studied experimentally and numerically in the current work. An …
aluminium alloy AA5182 are studied experimentally and numerically in the current work. An …
Temperature dependent work hardening in Ti–6Al–4V alloy over large temperature and strain rate ranges: Experiments and constitutive modeling
G Chen, C Ren, X Qin, J Li - Materials & Design, 2015 - Elsevier
The plastic deformation behaviors of Ti–6Al–4V alloy over wide ranges of strain rate (from
10− 4 to 10 4 s− 1) and temperature (from 20 to 900° C) are investigated by the quasi-static …
10− 4 to 10 4 s− 1) and temperature (from 20 to 900° C) are investigated by the quasi-static …
Numerical modeling of Ti-6Al-4V alloy orthogonal cutting considering microstructure dependent work hardening and energy density-based failure behaviors
Numerical modeling of the cutting process provides an effective method to obtain the micro-
scale and instantaneous process information which is difficult to be measured by …
scale and instantaneous process information which is difficult to be measured by …