Welding processing is an important method to connect precision component, but the internal
stress and crystal anisotropy reduce its performance, which are difficult to solve due to the …

Presented here is the evolution of microstructure of Ta during multi-axial forging, with a
specific understanding of how grain boundary movement and their interaction occurs during …

Microstructural evolution of a refractory tantalum-tungsten alloy (Ta-4% W) after cold rolling
from small to large von-Mises strains (0.12–2.7) was quantitatively studied using …

Vacuum electron beam welding has the characteristics of concentrated energy, controllable
heat input, almost no pollution, and a small heat-affected zone. In this study, the Ta10W alloy …

Low-cost Si was added to Mg-8Gd-4Y-1Nd alloys to improve their ductility. With the Si
increased from 0 to 1.0 wt%, the elongation increased from 8.7% to 17.1% for as-extruded …

Tantalum and its alloys are regarded as equipment construction materials for processing
aggressive acidic media due to their excellent properties. In this study, the influence of …

In order to study the influence of recovery, various pre-recovery treatments at different
temperatures followed by a recrystallization treatment are performed on deformed …

This study investigated the high-temperature wear characteristics of Ta-10W alloy,
composed of 90% tantalum and 10% tungsten, known for its high melting point, excellent …

Controlling the microstructure homogeneity is crucial in achieving high quality tantalum (Ta)
sputtering targets used in integrated circuit fabrication. Unluckily, traditional rolling easily …

The evolution of dislocation arrangement during deformation can lead to the development of
dislocation substructures which have direct consequences on the subsequent …