Modelling and simulation are very important for revealing the relationship between process
parameters and internal variables like grain morphology in solidification, precipitate …

Dislocation motion in body centered cubic (bcc) metals displays a number of specific
features that result in a strong temperature dependence of the flow stress, and in shear …

We used micropillar compression experiments to study the plasticity of ferrite and martensite
of two commercial dual phase steel grades (DP800). The activation of all three slip plane …

We use a physically-based crystal plasticity model to predict the yield strength of body-
centered cubic (bcc) tungsten single crystals subjected to uniaxial loading. Our model …

A simple analytical form for yield surface distortion under non-associated flow rule is
developed from the expression of the transformed second and third deviatoric stress …

Проблема построения конститутивных моделей, позволяющих описывать поведение
материалов в широких диапазонах изменения параметров воздействия (температур …

Abstract The Marciniak-Kuczynski (MK) technique, which describes the progressive
evolution of an initial imperfection and the subsequent necking of the sheet metal, has been …

High strength titanium alloys are generally used in widespread applications ranging over,
but not limited to biomedical, aerospace, automotive, marine, oil and gas, and energy …

Crystal plasticity-finite element method (CP-FEM) is now widely used to understand the
mechanical response of polycrystalline materials. However, quantitative mesh convergence …

A systematic constitutive modeling and calibration methodology were developed based on
rate-independent crystal plasticity to predict the quasi static macroscopic behavior of 3rd …