Deposition of coatings on the surface of a bulk material is a versatile, economical, and
effective strategy to provide additional features to the bulk material, mainly to improve its …

Cold spraying (CS), or cold gas dynamic spray (CGDS), is an emerging solid-state powder
deposition process, allowing fast and mass production and restoration of metallic …

Abstract Five Al–Al 2 O 3 coatings were deposited by gas dynamic cold spray, using
feedstocks containing 0, 10, and 50 wt.% of Al 2 O 3 particles admixed into commercially …

In this study, the effects of annealing and solution aging heat treatment on the microstructure
and mechanical properties of cold spray additive manufactured (CSAMed) AA2024/Al 2 O 3 …

Cold spraying (CS) has been widely explored over the last decade due to its low process
temperature and limited thermal effect on spray materials. As a solid-state process, the …

Abstract Metal Matrix Composites reinforced with WC particles and Co or Ni as matrices are
well-known for their unique combination of hardness, toughness, and thus superior wear …

Ni-WC composite are ideal protective coatings against wear that are often fabricated using
laser cladding. However, high temperature of laser cladding and associated materials …

The poor wear resistance of titanium and its alloys often results in galling and high wear
rates. One method to improve their wear resistance is by hard secondary phase …

Cold spray is a relatively new method used to deposit WC reinforced composite coatings,
where its low temperature is advantageous for avoiding oxidation and carbide …

Abstract The SiC particles reinforced Al5056 composite coating was deposited onto a pure
Al substrate by cold spraying (CS) of a powder mixture having 45 vol.% SiC, and then …