Oxyfuel combustion is one of the leading technologies considered for capturing CO 2 from
power plants with CCS. This involves the process of burning the fuel with nearly pure …

Power generation from renewable resources has attracted increasing attention in recent
years owing to the global implementation of clean energy policies. However, such power …

Oxyfuel combustion is one of the promising carbon capture and storage (CCS) technologies
for coal-fired boilers. In oxyfuel combustion, combustion gas is oxygen and recirculating flue …

Low-emission combustion (for example the use of low-NO x burners and air staging)
contributes to formation of a reducing atmosphere in the furnace, that is accompanied by …

Aiming at the high temperature corrosion in a coal-fired boiler, the effect of H 2 S and SO 2
on the corrosion of 12Cr1MoV under the water wall condition has been investigated by …

A validation/uncertainty quantification (VUQ) study was performed on the 1.5 MWth L1500
furnace, an oxy-coal fired facility located at the Industrial Combustion and Gasification …

This study has examined the corrosion of tubes exposed to Victorian brown coal fly ash
under the oxy-fuel combustion mode. The temperature of 650° C, flue gas composition …

In response to high-temperature corrosion after low NO x transformation with separate over
fire air (SOFA), combined arrangement of corner and wall tangential firing burners, as well …

The application of “systems-based tools''including exergy/pinch analysis and process
simulation has facilitated increases in the thermal efficiency of ambient pressure …

This dissertation presents two validation/uncertainty quantification (VUQ) studies, one on the
1.5 MWth coal fired furnace (L1500) and the other on the Reacting Particle and Boundary …