Efficient use of resources is a very important consideration for every production process,
especially where waste materials are used as raw materials. One example of these kinds of …

The paper discusses the topic of butt welding of polyurethane drive belts by the hot plate
method in the context of modeling the process of this technological operation. Based on the …

Most industrial machines use belt transmission for power transfer. These mechanisms often
use the round belts of several millimetres in diameter that are made of thermoplastic …

The article presents the results of works on formulating an algebraic model of crystallized
CO 2 extrusion process in a convergent circular–symmetrical channel. The paper presents …

Drive and conveyor belts are widely used in processing and mining industries. One of their
types, which are often used in light-duty applications, are the belts with round cross-section …

The paper presents a comparative analysis of the circular and flat cross-section belts using
measurements of a set of thermomechanical parameters, contributing to research about hot …

The welding of thermoplastic pipes under a shear joint configuration using friction spin
welding is investigated. The shear joint configuration consists of two cylindrical and …

Laboratory stands for measuring the values of power, torque and rotational speed, working
mechanisms of machines, are often connected with belt transmissions. Transmissions with a …

The need to diversify the sources of raw materials used in industry has resulted in the
increasing popularity of recycled materials. This situation is also observed in the clothing …

Modification of the punch geometry can greatly reduce the force necessary to perform the
perforation of the belt. This paper presents research on axially non-symmetrical piercing …