Nanofibers are one of the most attractive materials in various applications due to their
unique properties and promising characteristics for the next generation of materials in the …

The contamination of water sources by oily compounds is a severe environmental problem
gaining ground in scientific research in recent years since these compounds are generally …

Catalytic hydrotreating of algae bio-crude oil from hydrothermal liquefaction (HTL) of
Nannochloropsis sp. was performed. Different Ni-based catalysts, including Ni/γ-Al 2 O 3, Ni …

Removal of dust and NOx from flue gas is highly significant for air pollution control, and
integration of these two functions in one unit can greatly improve process efficiency. In this …

WO3 has different crystalline structures, including monoclinic and hexagonal phases.
Monoclinic WO3 (Wm) is the most common crystal phase in NH3-SCR catalysts. Hexagonal …

Commercial Cu-SAPO-34 catalysts suffer from poisoning of SO2 in the selective catalytic
reduction of NOx with NH3 (NH3-SCR). It is challenging to inhibit the deposition of …

Concerns regarding improper disposal of heavy metals have been considerably increasing
in the last years due to their deleterious effects on human health and the environment …

In this report, the effect of the cold sintering process (CSP) on the electro-chemo-mechanical
properties of 10 mol% Gd-doped ceria (GDC) is investigated. High purity nanoscale GDC …

Two combined structures of two-dimensional (2D) dense films and self-assembled three-
dimensional (3D) interlayers of poly (3, 4-ethylenedioxythiophene): polystyrene sulfonate …

For the past three decades, research interest in electrospinning (ES) has grown
exponentially. Twenty years ago, the initial reports on the utilization of this rather simple …