Aging of a cast 35Cr–45Ni heat resistant alloy
IA Sustaita-Torres, S Haro-Rodríguez… - Materials Chemistry and …, 2012 - Elsevier
The microstructural evolution during aging and its effect on the mechanical properties of a
centrifugally cast 35Cr–45Ni heat resistant alloy was studied by means of optical and …
centrifugally cast 35Cr–45Ni heat resistant alloy was studied by means of optical and …
Increasing weldability of service-aged reformer tubes by partial solution annealing
M Mostafaei, M Shamanian, H Purmohamad… - Journal of Materials …, 2016 - Springer
A dissimilar joint of 25Cr-35Ni/30Cr-48Ni (HP/HV) heat-resistant steels was evaluated. The
investigations indicated that the as-cast HP alloy contained M 7 C 3, M 23 C 6, and NbC …
investigations indicated that the as-cast HP alloy contained M 7 C 3, M 23 C 6, and NbC …
Analysis of weld-cracking and improvement of the weld-repair process of superplastic forming tools
A Duchosal, F Deschaux-Beaume, P Lours… - Materials & Design …, 2013 - Elsevier
Superplastic forming (SPF) dies are generally made of using heat resistant cast steels,
which are very sensitive to weld cracking. In order to improve the weld-repair process of …
which are very sensitive to weld cracking. In order to improve the weld-repair process of …
Aging of cast 35Cr-45Ni heat resistant alloys with different carbon content
IA Sustaita-Torres… - Materials …, 2016 - asmedigitalcollection.asme.org
The changes in microstructure that took place in two heat-resistant after aging alloys at 750°
C for a period of time of up to 1000 h are reported in this work. The alloys selected had a …
C for a period of time of up to 1000 h are reported in this work. The alloys selected had a …
Aging of a Low Carbon Heat Resistant Cast Alloy
IA Sustaita-Torres, S Haro-Rodríguez… - … Materials and Processes, 2018 - degruyter.com
The changes in microstructure that take place during aging a low carbon heat resistant alloy
at 750° C for a period of time of up to 1,000 h were studied by optical and scanning electron …
at 750° C for a period of time of up to 1,000 h were studied by optical and scanning electron …
aging of cast heat resisting alloys 35Cr–45Ni–0.1 C (MORE40X) and 40Cr–45Ni–0.2 C (UCX)
IA Sustaita Torres, SH Rodríguez, RC Ortiz - Materials Characterization, 2015 - Springer
Heat resisting cast alloys are designed to sustain operation while are exposed to
temperatures greater than 650° C. These alloys have widespread uses in petrochemical …
temperatures greater than 650° C. These alloys have widespread uses in petrochemical …
[HTML][HTML] A new designed method for evaluating the repairability of a newly developed 5Cr5MoV cold working die steel
Casting defects seriously affect the service life of a cold working die for the automobile
industry. For the newly developed cold working die steel, its repairability is a very important …
industry. For the newly developed cold working die steel, its repairability is a very important …