Studies on CO2 Adsorption and Desorption Properties from Various Types of Iron Oxides (FeO, Fe2O3, and Fe3O4)
A Hakim, TS Marliza, NM Abu Tahari… - Industrial & …, 2016 - ACS Publications
Various type iron oxides of FeO, Fe2O3, and Fe3O4 were used for carbon dioxide (CO2)
capture at room temperature and pressure by studying its adsorption–desorption properties …
capture at room temperature and pressure by studying its adsorption–desorption properties …
Comparative studies on adsorption isotherm and kinetic for CO2 capture using iron oxide impregnated activated carbon
Activated carbon AC was treated with Kmn04 and the treated AC was used to be
impregnated with iron oxide. The ratio of 0.1 M KMnO 4 treatment on AC to the 0.1 M iron …
impregnated with iron oxide. The ratio of 0.1 M KMnO 4 treatment on AC to the 0.1 M iron …
Metal oxide‐doped Ni/CaO dual‐function materials for integrated CO2 capture and conversion: Performance and mechanism
Integrated CO2 capture and conversion (ICCC) into valuable chemicals such as CH4 and
CO is a promising approach to mitigate anthropogenic CO2 emissions. In this work, we …
CO is a promising approach to mitigate anthropogenic CO2 emissions. In this work, we …
Enhanced syngas production from CO2 reforming of biomass-derived glycerol: Influence of CaO. Al2O3 support composition on the catalytic performance of Ni-based …
Our research focused on biomass-derived glycerol conversion by CO 2 reforming to syngas
using Ni-based catalysts supported by Al 2 O 3 and binary oxides, namely, MgO. Al 2 O 3 …
using Ni-based catalysts supported by Al 2 O 3 and binary oxides, namely, MgO. Al 2 O 3 …
Adsorbent material based on carbon black and bismuth with tunable properties for gold recovery
Adsorption recovery of precious metals on a variety of solid substrates has steadily gained
increased attention in recent years. Special attention was paid to the studies on the …
increased attention in recent years. Special attention was paid to the studies on the …
[PDF][PDF] Adsorption kinetics for CO2 capture using cerium oxide impregnated on activated carbon
Various metal oxides of CeO2, ZnO, and Co3O4 impregnated on activated carbon (AC) were
synthesized to determine the CO2 capture efficiency and analyse with adsorption kinetics …
synthesized to determine the CO2 capture efficiency and analyse with adsorption kinetics …
Study of CO2 adsorption and desorption on activated carbon supported iron oxide by temperature programmed desorption
Anthropogenic gas of CO2 level was higher than CO2 atmospheric safety limit of 350 ppm
since 80’ s. It can be assumed that CO2 level growth directly proportional to the …
since 80’ s. It can be assumed that CO2 level growth directly proportional to the …
[PDF][PDF] Kinetics and thermodynamic modeling for CO2 capture using NiO supported activated carbon by temperature swing adsorption
Solid sorbent from functionalized activated carbon (AC) could enhance the adsorption
capacity in CO2 capture. This study emphasizes cyclic CO2 capture using NiO …
capacity in CO2 capture. This study emphasizes cyclic CO2 capture using NiO …
Development of α-Fe2O3 as Adsorbent and its Effect on CO2 Capture
A Hakim, TS Marliza, MN Abu Tahari… - Materials Science …, 2016 - Trans Tech Publ
Iron oxide (α-Fe2O3) as adsorbent was no longer new in CO2 adsorption studies. However,
its contributions in the industry still in limited wherein lack of convincing results of quantifying …
its contributions in the industry still in limited wherein lack of convincing results of quantifying …
[PDF][PDF] Adsorption Isotherm and Surface Analysis for the Carbonate Formation on Nano Coral-Shaped Iron (Iii) Oxide
K Nano, HING ING, SJS KUDA - Sains Malaysiana, 2023 - academia.edu
The α-Fe2O3 was synthesized using the hydrolysis method to obtain the nano coral-shaped
morphology. The adsorption isotherm and surface analysis upon CO2 adsorption were …
morphology. The adsorption isotherm and surface analysis upon CO2 adsorption were …