The aim of the study is to apply a plasma nitriding process to the 90CrMoV8 steel commonly
employed in wood machining, and to determine its efficiency to improve both mechanical …

This study presents the plasma nitriding of Cr–Mo–V tool steel to protect it from
environmental degradation. The steel samples after metallographic polishing were nitrided …

The aim of this study is first to define the effect of a surface finishing such as sand-blasting
on the geometry of a wood cutting tool and its wear resistance. In addition, the effectiveness …

The aim of this work is to characterize the rolling and rolling-sliding contact fatigue failure
mechanisms on the 32CrMoV13 nitrided steel. During rolling contact fatigue tests (RCF), two …

In this study the effects on resistance to corrosion of a low alloy steel after plasma nitriding
has been reported. Nitriding was performed at a low temperature of 450° C and also at 520° …

Hard, partly amorphous, ZrTiB (N) coatings were deposited by Physical Vapour Deposition
(PVD) onto (111) silicon wafers at low substrate temperatures of 85 and 110° C using …

This paper presents corrosion behaviour of duplex treated low alloy steel. Different kinds of
samples were tested: non-treated, plasma nitrided, ZrBN-triode sputtered and ZrBN-duplex …

This study concerns plasma nitriding of tool steel at different temperatures and its effects on
corrosion resistance. Inside the nitriding reactor steel samples were placed on the sample …

X-ray diffraction assisted four-point bending method (XRDABM) enables to analyze the
evolution of surface stress with the strain during bending of specimens. This experimental …

Au travers de ce travail de thèse, nous nous sommes fixé comme objectif, de rechercher des
solutions pour augmenter la durée de service des outils de coupe du bois, plus …