Several 2D and 3D numerical models have been developed to investigate rolling contact
fatigue (RCF) by employing a continuum damage mechanics approach coupled with an …

The analytical expressions currently available for Hertzian contact stresses are applicable
only for homogeneous materials and not for case-hardened bearing steels, which have …

In this investigation, a three-dimensional (3D) finite element (FE) model was developed to
study subsurface initiated spalling observed in rolling line contact of tribo components such …

Creep tests of high modulus polyethylene (HMPE) samples are performed to obtain the
corresponding creep and creep-rupture curves. The results show that the secondary creep …

For modern plate steels exhibiting high toughness and ductility, the conventional Charpy test
is ostensibly stretched beyond its limits of applicability. Impact tests yield absorbed energy …

Bearing units of lifting machines, products of construction, road, aviation, space and other
branches of technology are very important structural elements, since the failure of even one …

Разработана методика определения степени нагруженности тел качения в рабочей
зоне роликовых радиальных однорядных подшипников, согласно которой …

A method for determining the degree of loading of rolling elements in the working area of
roller radial single-row bearings has been developed, according to this method the load …

The study is devoted to the determination of the coefficients of the degree of contact of rolling
surfaces, considering the tolerance field of rolling bodies, as well as the influence of the …

Bearing units of lifting machines, products of construction, road, aviation, space and other
branches of technology are very important structural elements, since the failure of even one …