A review of thermal conductivity of various nanofluids
MH Ahmadi, A Mirlohi, MA Nazari… - Journal of Molecular …, 2018 - Elsevier
In the present paper, several experimental and theoretical studies conducted on the thermal
conductivity of nanofluids are represented and investigated. Based on the reviewed studies …
conductivity of nanofluids are represented and investigated. Based on the reviewed studies …
Impact of various metal-oxide based nanoparticles and biodiesel blends on the combustion, performance, emission, vibration and noise characteristics of a CI engine
With the burning of 1 L of diesel fuel, approximately 3 kg of greenhouse gas is released into
the atmosphere. Therefore, it is of great importance to reduce emissions with some additives …
the atmosphere. Therefore, it is of great importance to reduce emissions with some additives …
Experimental comparison between ZnO and MoS2 nanoparticles as additives on performance of diesel oil-based nano lubricant
This study compares the tribological and thermophysical features of the lubricating oil using
MoS2 and ZnO nano-additives. The average size of MoS2 and ZnO nanoparticles were 90 …
MoS2 and ZnO nano-additives. The average size of MoS2 and ZnO nanoparticles were 90 …
Analysis of efficiency enhancement of flat plate solar collector using crystal nano-cellulose (CNC) nanofluids
The upward energy demand, along with the depletion of conventional energy sources,
demands improved utilization of renewable energy resources. Among all renewable energy …
demands improved utilization of renewable energy resources. Among all renewable energy …
State-of-the-art and future perspectives of environmentally friendly machining using biodegradable cutting fluids
The use of cutting fluids has played a vital role in machining operations in lubrication and
cooling. Most cutting fluids are mineral oil-based products that are hazardous to the …
cooling. Most cutting fluids are mineral oil-based products that are hazardous to the …
Stability and thermal conductivity enhancement of aqueous nanofluid based on surfactant-modified TiO2
M Ouikhalfan, A Labihi, M Belaqziz… - Journal of Dispersion …, 2020 - Taylor & Francis
The surface modified-titania (TiO 2) nanoparticles were prepared by hydrothermal treatment
by two kinds of surfactants, CTAB and SDS. The produced nanoparticles were characterized …
by two kinds of surfactants, CTAB and SDS. The produced nanoparticles were characterized …
Experimental investigation of copper nanofluid based minimum quantity lubrication in turning of H 11 steel
Plentiful supply of coolant might enhance the machining cost and also generates
environmental hazard. As a result, substitute methods are required to eliminate the problems …
environmental hazard. As a result, substitute methods are required to eliminate the problems …
Investigation of the concentration rate and aggregation behaviour of nano-silver added colloidal suspensions on wear behaviour of metallic materials by using ANOVA …
In this study, the tribological performance of nano-silver particles prepared at different
concentrations was investigated by the parameters of temperature, friction coefficient, weight …
concentrations was investigated by the parameters of temperature, friction coefficient, weight …
A novel study on the influence of graphene-based nanofluid concentrations on the response characteristics and surface-integrity of Hastelloy C-276 during minimum …
G Singh, S Sharma, AH Seikh, C Li, Y Zhang… - Heliyon, 2023 - cell.com
In present investigation, the impact of nanoparticle concentration on the machining
accomplishment of Hastelloy C-276 has been examined in turning operation. The outputs …
accomplishment of Hastelloy C-276 has been examined in turning operation. The outputs …
Influence of graphene and multi-walled carbon nanotube additives on tribological behaviour of lubricants
In the present study, the tribological performance of water-based emulsion (lubricant) was
investigated by blending carbon fillers such as graphene nanoplatelets and multiwall carbon …
investigated by blending carbon fillers such as graphene nanoplatelets and multiwall carbon …