The hot deformation behaviors of Ni18Cr9Co9Fe5Nb3Mo superalloy were explored in the
formation temperature range free of γ'phase with various strain rates applied. The hot …

The present study aimed at characterizing the flow characteristics and workability of an as-
extruded magnesium alloy ZK61 by isothermal compression tests performed at temperatures …

In the present work, hot compression deformation behavior and microstructure evolution in a
homogenized Al–6Mg–0.8 Mn alloy with nano-sized Al 6 Mn phase particles were …

The high-temperature deformation behaviors of a typical Ni-based superalloy are
investigated by hot compression tests under the strain rate of 0.001–1 s− 1 and temperature …

The present work explored the impacts of temperature, strain rate, strain and initial
orientation on hot-compression behavior and microstructural evolvement of hot-extruded …

Abstract Al-7.3 Zn-2.2 Mg-2Cu alloy is known for its high strength, achieved because of
higher alloying concentration. However, the higher alloying concentration presents …

Recently, the hybrid method has been developed in which wire and arc additive
manufacturing (WAAM) use to produce the near net shape preform for the single-step hot …

For characterizing the hot workability of high-strength AA7050 aluminum alloy, constitutive
equations and processing maps were established. The activation energy values under …

The 6xxx series aluminium alloys are extensively used in the structural applications of
automobile and aerospace. The strength of these alloys can be further improved by severe …

The hot tensile deformation behaviors of an Al–Zn–Mg–Cu alloy are studied by uniaxial
tensile tests under the deformation temperature of 340–460° C and strain rate of 0.01–0.001 …