Developments in cutting tool technology in improving machinability of Ti6Al4V alloy: A review

A Saini, BS Pabla, SS Dhami - Proceedings of the Institution …, 2016 - journals.sagepub.com
Ti6Al4V is the most widely used titanium alloy and is a demanding material in applications
requiring high specific strength and corrosion resistance, that is, aerospace, automobile and …

Microstructural, phase evolution and corrosion properties of silicon carbide reinforced pulse electrodeposited nickel–tungsten composite coatings

S Singh, M Sribalaji, NP Wasekar, S Joshi… - Applied Surface …, 2016 - Elsevier
Silicon carbide (SiC) reinforced nickel–tungsten (Ni–W) coatings were successfully
fabricated on steel substrate by pulse electrodeposition method (PED) and the amount of …

Tuning the H/E* ratio and E* of AlN coatings by copper addition

J Guo, H Wang, F Meng, X Liu, F Huang - Surface and Coatings Technology, 2013 - Elsevier
Hard coatings with H/E*> 0.1 and low E*, where H is the hardness and E* is the indentation
modulus, are highly desirable for wear-resistant applications. Copper has been added into …

Achieving very low wear rates in binary transition-metal nitrides: The case of magnetron sputtered dense and highly oriented VN coatings

F Ge, P Zhu, F Meng, Q Xue, F Huang - Surface and Coatings Technology, 2014 - Elsevier
The monolithic binary transition-metal nitride coatings are easy to prepare but typically suffer
from a high wear rate (typically far greater than 10− 16 m 3/N m). Here we report a …

Superhard V-Si-N coatings (> 50 GPa) with the cell-like nanostructure prepared by magnetron sputtering

F Huang, F Ge, P Zhu, H Wang, F Meng, S Li - Surface and Coatings …, 2013 - Elsevier
By using reactive magnetron co-sputtering deposition, we prepared V-Si-N coatings from a
pulsed-DC-excited vanadium source and an RF-DC-coupled Si source. The process was …

Improved oxidation resistance of zirconium at high-temperature steam by magnetron sputtered Cr-Al-Si ternary coatings

Y Dong, F Ge, F Meng, G Zhao, J Zhou, Z Deng… - Surface and Coatings …, 2018 - Elsevier
Accident tolerant fuel claddings are extremely urgent to increase the safety margin of light
water reactors. In this work, Cr-Al-Si ternary alloy coatings were proposed to increase high …

Structural and optical properties of AlN sputtering deposited on sapphire substrates with various orientations

X Peng, J Sun, H Liu, L Li, Q Wang, L Wu… - Journal of …, 2022 - iopscience.iop.org
AlN thin films were deposited on c-, a-and r-plane sapphire substrates by the magnetron
sputtering technique. The influence of high-temperature thermal annealing (HTTA) on the …

Influence of the microstructure of sputtered Ti films on the anodization toward TiO2 nanotube arrays

P Li, S Dai, D Dai, Z Zou, R Wang, P Zhu, K Liang… - Chemical Physics …, 2023 - Elsevier
The microstructure of sputtered Ti films plays a crucial role in the formation of TiO 2
nanotube arrays (TNTs) via anodization. Magnetron sputtering under controllable …

The structure and toughness of TiN coatings prepared by modulated pulsed power magnetron sputtering

H Li, Y Liu, B Jiang, J Kan, Z Liu - Vacuum, 2016 - Elsevier
Titanium nitride (TiN) coatings were prepared on different substrates (Si wafer, M2 steel,
glass) by modulated pulsed power (MPP) sputtering and continuous dc magnetron …

Microstructural effects on the high-temperature steam oxidation resistance of magnetron sputtered Cr-Al-Si-N quaternary coatings on zirconium coupons

Y Dong, H Zhu, F Ge, G Zhao, F Huang - Surface and Coatings Technology, 2019 - Elsevier
It is of great significance to develop accident tolerant fuel claddings for enhancing the safety
margin of light water reactors. Cr-Al-Si-N quaternary coatings were proposed to improve the …