In this article, the stability of twins, especially {10–12} twins, in Mg alloys was critically
reviewed. In the last decade, pre-twinning is considered to be an effective method for …

In this study, dynamic precipitation was observed in ZK60 (Mg-6.0 Zn-0.5 Zr) alloy during low
temperature extrusion. The microstructure and mechanical properties of the alloy were …

The main aim of the current work is to investigate the effect of equal channel angular
pressing (ECAP) processing parameters, namely, number of passes, ECAP die angle, route …

The microstructure characterization, mechanical properties and texture evolution of a ZK60
alloy achieved via the extrusion-shearing (ES) process were systematically studied with the …

Billets of pure Mg were processed using two ECAP dies with internal channel angle of 90°
and 120° for 4-passes of route Bc at 225° C. Finite element analysis was used to investigate …

Repetitive upsetting-extrusion (RUE) is known as a processing method that effectively
improves the properties of a billet without changing its initial shape. In this paper, one pass …

Continuous forging extrusion (CFE) is a newly developed extrusion process to refine grains
of wrought magnesium alloys. However, at lower extrusion temperatures, CFE also easily …

Magnesium-Zinc-Zirconium (Mg-Zn-Zr) alloys have caught considerable attention in medical
applications where biodegradability is critical. The combination of their good …

This study presents a comprehensive evaluation of Equal Channel Angular Pressing
(ECAP) processing on the structural evolution and mechanical properties of AA2xxx …

The present study aimed to explore the deformation behavior of a highly ductile Mg-2Gd-0.4
Zr alloy at room temperature. Tensile tests were carried out at room temperature, aiming to …