Characterization and machinability analysis of aluminium-based metal matrix composites (MMC): A critical review

RR Mishra, A Panda, AK Sahoo… - Proceedings of the …, 2024 - journals.sagepub.com
Hybrid nanocomposite has progressively attracted advanced industrial and automotive
sectors in recent years. Hybrid nanocomposites have emerged as a viable material for a …

Effect of SiC and TiO2 Nanoparticles on Machinability of AA7178 Metal Matrix Composite: A Comparative Analysis Using Taguchi and GRA Approaches

N Bharat, PSC Bose - JOM, 2024 - Springer
In this study, a comparison is made between the Taguchi and the GRA strategy for
enhancing the machinability of AA7178 metal matrix composites that are reinforced with SiC …

Process optimization, microstructure characterization, and tribological performance of Y2O3 modified Ti6Al4V-WC gradient coating produced by laser cladding

Y Xu, S Fu, H Lu, W Li - Surface and Coatings Technology, 2024 - Elsevier
In this study, the two layers Ti6Al4V-based wear-resistant coatings with a gradient WC
structure were produced on a Ti6Al4V substrate by laser cladding. The cladding parameters …

[HTML][HTML] Wire electrical discharge machining characteristics of rare earth oxides reinforced AZ91D magnesium alloy hybrid composite using Taguchi-grey relational …

S Gotagunaki, VS Mudakappanavar, R Suresh - Hybrid Advances, 2023 - Elsevier
The objective of the present study was to investigate the influence of machining parameters
on performance for Wire Electrical Discharge Machining (WEDM) of Rare Earth (RE) oxides …

Microstructure and mechanical properties of low-cost SiC-reinforced aluminum and Al4Cu matrix composites produced by sintering in vacuum

A Wąsik, B Leszczyńska-Madej, M Madej, M Goły - Materials, 2023 - mdpi.com
Composite materials based on Al and Al4Cu with the addition of SiC particles (2.5; 5; 7.5; 10
wt.%) were produced in low-cost conventional powder metallurgy processes involving …

Investigation on the effect of process parameters and optimization using GRA under biodegradable oil based MQL in machining

MA Makhesana, PJ Bagga, MK Agrawal… - International Journal on …, 2024 - Springer
Improving the machining efficiency in form of better surface quality and improved tool life is
always challenging. This is due to the high amount of heat produced during machining …

Parametric optimization of thermoelectric machining of stir-cast hybrid magnesium metal matrix composite with alumina and silicon carbide as reinforcement

D Kumar, RK Porwal - Journal of The Institution of Engineers (India) …, 2024 - Springer
Magnesium alloy and composites have its applicability in aerospace industry due to
exceptional properties yet being lighter. Their biodegradable property makes it useful in …

Surface Integrity Characteristics and Multi-response Optimization in Wire-EDM of Al–Al3Fe Composites

G Anand, S Sardar, A Guha, D Das - Arabian Journal for Science and …, 2024 - Springer
Wire-electrical discharge machining (wire-EDM) is gaining wider acceptance for producing
components of Al-matrix composites (Al-MCs) that are hard to machine by traditional …

Surface characteristics of in-situ Al-2Mg/20 Al3Fe composite in wire-EDM: experiments, modeling and optimizations by MORSM and metaheuristic approaches

G Anand, S Sardar, S Sah, A Guha, D Das - International Journal on …, 2024 - Springer
The wire-electrical discharge machining (wire-EDM) is increasingly recommended for the
machining of complex-shaped components with high surface finish and geometrical …

Experimental investigation of wire electrical discharge machining parameters on WE43 magnesium alloy

JMAI Solomon, G Selvakumar… - Metallurgical …, 2024 - metallurgical-research.org
The influence of wire electrical discharge machining (WEDM) factors on the WE43
magnesium alloy is experimentally investigated in this work. Voltage, peak current, pulse-on …