Abstract The nanocrystalline Fe− Ni− Cr coatings were electrodeposited by using the pulse
current technique. The SEM results showed that the coatings had a mixed morphology of …

In this research, FeCoW alloy coatings were prepared by galvanostatic method. The
influence of current density and bath composition on microstructure and magnetic properties …

The sandwiched laminated soft magnetic films/planar coils giant magneto-impedance (GMI)
sensors exhibit prominent advantages in miniaturization due to compatibility with micro …

In this research, nanocrystalline Co–Fe–W alloy coatings were electrodeposited from a
citrate-borate bath. The influence of electrolyte pH on the morphology, microstructure and …

Cobalt Iron Yttrium (CoFeY) magnetic film was made using the sputtering technique in order
to investigate the connection between the thickness and annealing procedures. The sample …

Graphite is considered as an ideal anode material for lithium-ion battery (LIB) due to its high
stability, good conductivity and wide source of availability. However, the low energy density …

CoFe-Cu multilayered nanowires have been fabricated by pulse electrodeposition into the
pores of∼ 100 nm diameter anodized aluminum oxide (AAO) templates. Here, we …

To investigate the correlations between different thicknesses and heat treatments, this study
used a sputtering method to create CoFeY films. The results of X-ray diffraction (XRD) …

In this study, a 10–50 nm Co32Fe30W38 alloy thin film sputtered on glass substrates was
annealed at different temperatures for 1 h including room temperature (RT), 300, 350, and …

Single crystals of sodium chloride (NaCl) of dimension 1× 1 cm 2 have been successfully
grown from various solution growth methods like slow evaporation, fast evaporation, and …