The wear resistance of the part surface has become an important factor affecting its own
service life. Laser cladding (LC), as a surface modification technology, can prepare a …

This review considered various methods for depositing special modifying coatings on
medical implants made of titanium alloys including techniques such as electrochemical …

TiC x thin films have been deposited on steel substrates using High Power Impulse
Magnetron Sputtering (HiPIMS) under Ar-C 2 H 2 atmosphere. The effect of varying the …

In this work, two thin films (Ti and Al 2 O 3/Ti) were deposited on 316LSS substrates by the
physical vapor deposition (PVD) sputtering technique. Heat treatment was applied for thin …

This manuscript introduces the properties and diverse applications of plasma generated
using commercial frequencies of 50/60 Hz. Commercial frequency (CF) derived plasma …

Titanium carbide coatings exhibit a variety of tribological properties depending on their
carbon concentration. In the present article, a series of coatings with compositions ranging …

Biomaterials with adequate properties to direct a biological response are essential for
orthopedic and dental implants. The surface properties are responsible for the biological …

This study explored the feasibility of fabricating Ti–Al–C based composite coatings using
2Ti/xAl/0.5 C (x= 0.2–1.5) agglomerated powders by plasma spraying technique. The effect …

Herein, structural evolution and degradation mechanisms of the amorphous FeCrAlMoSiY
coating during oxidation up to 16 h in 1200° C steam was studied, using scanning electron …

This research investigates the impact of peak power (from 44 to 105 kW) on the structural
and tribological properties of W-Ti-CN (O) films. Chemical analysis of the coatings, using …