Thermal spray coatings are a group of coating processes that enhance the performance of
parts by adding functionality to surfaces. In the past few decades, thermal spray coatings …

High-temperature corrosion of coal-fired boiler parts such as water walls and superheated
tubes poses a serious threat to the efficiency of the thermal power plant. To overcome this …

Ceramic and metals mixed phases are a category of materials known as cermet to produce
materials that have the best characteristics of both such as high hardness, abrasion wear …

The effect of operating gas temperature and powder type on microstructure and mechanical
characteristics of cold spraying coatings deposited on EZ33A-T5 magnesium alloy was …

The feasibility study of elaboration of metal composite coatings by detonation spray using
the blends of iron, nickel, copper, cobalt, and aluminum powders was performed using …

The impact of medium-and high-entropy alloy fillers (4E MEA-Al0. 25Fe0. 25Ni0. 25Cu0. 25,
and 5E HEA-Al0. 20Fe0. 20Ni0. 20Cu0. 20Ti0. 20) on the microstructures and corrosion …

The WC–12Co coatings were deposited on SS 410 substrates using a high-velocity oxygen
fuel (HVOF) process and the coatings were heat-treated at 750° C for 1 h in argon …

Corrosion is a natural phenomenon that gradually deteriorates any material. Mild steel
structures are quickly corroded by the sea environment, and thus protective coatings are …

Thermal spraying techniques are widely used for aerospace applications allowing improve
significantly thermal and electrical insulating properties and strength of structural materials …

Sažetak This study aims to fabricate WC-Co-Cr coatings on the solution-treated 21-4N steel
utilizing high-velocity oxy-fuel (HVOF) and high-velocity air fuel (HVAF) techniques. The …