The unique combination of very large strains, high temperatures and high strain rates
inherent to friction stir welding (FSW) and friction stir processing (FSP) and their dependency …

Considerable progress has been achieved in friction stir welding (FSW) of steels in every
aspect of tool fabrication, microstructure control and properties evaluation in the past two …

The aim of this research is to characterize the unique microstructural features of Al-matrix
nanocomposites reinforced by graphene nano-platelets (GNPs), fabricated by multi-pass …

The microstructure and mechanical/electrochemical properties of friction stir welded
(FSWed) joints of two dissimilar alloys, 5052-H32 aluminum and dual-phase (DP) steel, are …

In this research, the impact of the heat input (HI) used during friction stir welding (FSW) on
the microstructure, micro-texture and mechanical properties of DP600 steel was examined …

An ultra-low carbon Ti-containing microalloyed steel has been thermo-mechanically
controlled rolled and water-quenched. Microstructural characterization of the samples finish …

An attempt has been made to investigate Fe-rich fragments and surrounding intermetallic
compounds in aluminum-steel friction stir welds using conventional EBSD+ EDS as well as …

In this study, the crystallography of the nugget zone of bainitic steel was examined by
applying friction stir welding (FSW) and submerging in various cooling mediums. In air, the …

Herein, we address the scientific gap in the relationship among the microstructure,
crystallography, and toughness in the nugget zone (NZ) of friction stir welded X80 pipeline …

In this study, friction stir welding (FSW) was conducted on 1500 MPa martensitic steel with a
thickness of 2.3 mm at 500 rpm and 60 mm/min with and without the application of ultrasonic …