Dynamic recrystallization mechanisms and twining evolution during hot deformation of Inconel 718
The hot deformation behavior of an IN718 superalloy was studied by isothermal
compression tests under the deformation temperature range of 950–1100° C and strain rate …
compression tests under the deformation temperature range of 950–1100° C and strain rate …
[HTML][HTML] Deformation behavior and microstructural evolution of pure Ti produced by hot compressing
T Zhao, B Zhang, Z Zhang, L Chen, Y Xu, J Cai… - Journal of Materials …, 2022 - Elsevier
As a component layer of layered composites, pure Ti renders the advantages of high specific
strength, low density, low elastic modulus, high-temperature corrosion resistance and …
strength, low density, low elastic modulus, high-temperature corrosion resistance and …
Hot deformation behavior and processing map of a typical Ni-based superalloy
The hot compressive deformation behaviors of a typical Ni-based superalloy are
investigated over wide ranges of forming temperature and strain rate. Based on the …
investigated over wide ranges of forming temperature and strain rate. Based on the …
Effect of strain rate on microstructure evolution of a nickel-based superalloy during hot deformation
H Zhang, K Zhang, H Zhou, Z Lu, C Zhao, X Yang - Materials & Design, 2015 - Elsevier
The hot deformation behavior of a nickel-based superalloy was investigated by means of
isothermal compression tests in the strain rate range of 0.001–10 s− 1 at 1110° C …
isothermal compression tests in the strain rate range of 0.001–10 s− 1 at 1110° C …
Effect of homogenization and solution treatments time on the elevated-temperature mechanical behavior of Inconel 718 fabricated by laser powder bed fusion
EM Fayed, M Saadati, D Shahriari, V Brailovski… - Scientific Reports, 2021 - nature.com
In the present study, the effect of homogenization and solution treatment times on the
elevated-temperature (650° C) mechanical properties and the fracture mechanisms of …
elevated-temperature (650° C) mechanical properties and the fracture mechanisms of …
Influence of strain rate on subsolvus dynamic and post-dynamic recrystallization kinetics of Inconel 718
A Nicolaÿ, G Fiorucci, JM Franchet, J Cormier… - Acta Materialia, 2019 - Elsevier
Influence of strain rate on dynamic and post-dynamic recrystallization kinetics of Inconel 718
is investigated by performing hot compression tests at constant strain rate in the range …
is investigated by performing hot compression tests at constant strain rate in the range …
Hot deformation behavior and constitutive modeling of fine grained Inconel 718 superalloy
YB Tan, YH Ma, F Zhao - Journal of Alloys and Compounds, 2018 - Elsevier
The hot deformation behavior of fine grained Inconel 718 superalloy was investigated by
compression test in the temperature range of 950 to 1150° C and strain rate range of 0.1–10 …
compression test in the temperature range of 950 to 1150° C and strain rate range of 0.1–10 …
Constitutive models for high-temperature flow behaviors of a Ni-based superalloy
The high-temperature deformation behaviors of a typical Ni-based superalloy are
investigated by hot compression tests under the strain rate of 0.001–1 s− 1 and temperature …
investigated by hot compression tests under the strain rate of 0.001–1 s− 1 and temperature …
Elevated temperature mechanical behavior of IN625 alloy processed by laser powder-bed fusion
Inconel 625 alloy tensile specimens fabricated by laser powder-bed fusion and subjected to
different post-processing treatments, such as stress relief annealing, low-temperature …
different post-processing treatments, such as stress relief annealing, low-temperature …
Hot tensile deformation behaviors and fracture characteristics of a typical Ni-based superalloy
The hot tensile deformation behaviors and fracture characteristics of a typical Ni-based
superalloy are studied by uniaxial tensile tests under the deformation temperature range of …
superalloy are studied by uniaxial tensile tests under the deformation temperature range of …