A new strategy to toughen epoxy resins through control of topological structure of cross-
linking network has been presented. With a tertiary amine initiator, the curing proceeded via …

Abstract 3D cross‐linking networks are generated through chemical reactions between
thermosetting epoxy resin and hardener during curing. The curing degree of epoxy material …

The curing reaction of an epoxy resin [diglycidyl ether of bisphenol A (DGEBA)] combined
with a methyl‐hexahydrophtalic anhydride (MHHPA) hardener and a benzyldimethylamine …

Adhesive bonding is becoming increasingly common in civil infrastructure construction due
to the increased use of advanced composites. Due to the large scale of the structures and …

There has been studied correlation between the glass transition temperature (Tg) and the
conversion degree (α) in the cure reaction of the EPY® epoxy system (applied for machine …

The physical aging of the epoxy network consisting of a diglycidyl ether of bisphenol A
(BADGE n= 0) and m-xylylenediamine (m-XDA) were studied by differential scanning …

Curing reactions of the EPY® epoxy system (Epidian 6+ TETA) applied for machine
foundation chocks were studied to determine time-temperature-transformation (TTT) …

In this study, we present a method to detect cure‐induced strain in an epoxy resin (EP) with
a Fiber Bragg Grating (FBG) sensor. By embedding the optical fiber into the EP resin the …

Rotational molding is a new process for thermosets, few research works have been done on
this subject. The goal of this study is to determine the optimal conditions (time, temperature …

Although multifunctional epoxy resin adhesive is characteristic of good heat resistant, it is
brittle. Therefore, tough epoxy adhesive with outstanding comprehensive properties is in …