[HTML][HTML] Stress corrosion cracking of magnesium alloys: A review
J Jiang, X Geng, X Zhang - Journal of Magnesium and Alloys, 2023 - Elsevier
Magnesium (Mg) alloys have been widely used in automobile, aviation, computer, and other
fields due to their lightweight, high specific strength and stiffness, low pollution, and good …
fields due to their lightweight, high specific strength and stiffness, low pollution, and good …
Corrosion of ultra-high-purity Mg in 3.5% NaCl solution saturated with Mg (OH) 2
F Cao, Z Shi, J Hofstetter, PJ Uggowitzer, G Song… - Corrosion …, 2013 - Elsevier
Corrosion was evaluated for ultra-high-purity magnesium (Mg) immersed in 3.5% NaCl
solution saturated with Mg (OH) 2. The intrinsic corrosion rate measured with weight loss …
solution saturated with Mg (OH) 2. The intrinsic corrosion rate measured with weight loss …
Influence of pH and chloride ion concentration on the corrosion of Mg alloy ZE41
The influence of pH and chloride ion concentration on the corrosion behaviour of ZE41 was
studied using immersion tests and electrochemical measurements. A shorter incubation …
studied using immersion tests and electrochemical measurements. A shorter incubation …
Calculated phase diagrams and the corrosion of die-cast Mg–Al alloys
M Liu, PJ Uggowitzer, AV Nagasekhar, P Schmutz… - Corrosion …, 2009 - Elsevier
The corrosion of commercial die-cast Mg–Al alloys was elucidated by a study, of the
corrosion in 3% NaCl, of (i) high-pressure die-cast (HPDC) model Mg–Al alloys,(ii) low-purity …
corrosion in 3% NaCl, of (i) high-pressure die-cast (HPDC) model Mg–Al alloys,(ii) low-purity …
Influence of solution treatment on the corrosion fatigue behavior of an as-forged Mg-Zn-Y-Zr alloy
In this work, the corrosion fatigue behaviors of an as-forged Mg-6.7% Zn-1.3% Y-0.6% Zr
alloy before and after solid solution treatment (T4) in 3.5 wt% NaCl solution have been …
alloy before and after solid solution treatment (T4) in 3.5 wt% NaCl solution have been …
Stress corrosion cracking of magnesium alloys
A Atrens, N Winzer, W Dietzel - Advanced Engineering …, 2011 - Wiley Online Library
An overview is provided of Mg SCC. Intergranular stress corrosion cracking (IGSCC) is
typically caused by a continuous second phase along grain boundaries. The second phase …
typically caused by a continuous second phase along grain boundaries. The second phase …
Novel low-cost activated algal biochar as a cathode catalyst for improving performance of microbial fuel cell
Microalgae derived activated biochar (ABC-900) was synthesized by thermal activation of
biochar at 900° C and the activated biochar was characterised to ascertain the applicability …
biochar at 900° C and the activated biochar was characterised to ascertain the applicability …
An exploratory study of the corrosion of Mg alloys during interrupted salt spray testing
A first systematic investigation was carried out to understand the corrosion of common Mg
alloys (Pure Mg, AZ31, AZ91, AM30, AM60, ZE41) exposed to interrupted salt spray. The …
alloys (Pure Mg, AZ31, AZ91, AM30, AM60, ZE41) exposed to interrupted salt spray. The …
Influence of phase dissolution and hydrogen absorption on the stress corrosion cracking behavior of Mg-7% Gd-5% Y-1% Nd-0.5% Zr alloy in 3.5 wt.% NaCl solution
Through investigating the influence of phase dissolution and hydrogen on the stress
corrosion cracking (SCC) behavior of an as-cast Mg-7% Gd-5% Y-1% Nd-0.5% Zr alloy in …
corrosion cracking (SCC) behavior of an as-cast Mg-7% Gd-5% Y-1% Nd-0.5% Zr alloy in …
Effect of Zn addition on the stress corrosion cracking of as-cast BCC Mg-11Li based alloys
B Deng, D Liang, C Li, C Yan, Y Dong, N Wang… - Corrosion …, 2024 - Elsevier
The stress corrosion cracking (SCC) of ultralight Mg-11Li alloys with different Zn content
revealed the obvious SCC sensitivity of mechanical ductility, while the mechanical strength …
revealed the obvious SCC sensitivity of mechanical ductility, while the mechanical strength …