Nanomaterials for solid oxide fuel cells: A review
Nanotechnology is utilized well in the development and improvement of the performance in
Solid Oxide Fuel Cells (SOFCs). The high operating temperature of SOFCs (700–900° C) …
Solid Oxide Fuel Cells (SOFCs). The high operating temperature of SOFCs (700–900° C) …
Recent advances in material and performance aspects of solid oxide fuel cells
Abstract Solid Oxide Fuel Cells (SOFCs) are emerging as potential energy conversion
devices owing to their high efficiencies and less greenhouse gas emissions. Though there …
devices owing to their high efficiencies and less greenhouse gas emissions. Though there …
Neural network based MPPT control with reconfigured quadratic boost converter for fuel cell application
An artificial neural network (ANN) based maximum power point tracking (MPPT) technique
for proton exchange membrane fuel cell (PEMFC) is analysed and proposed in this paper …
for proton exchange membrane fuel cell (PEMFC) is analysed and proposed in this paper …
Progress in nanomaterials fabrication and their prospects in artificial intelligence towards solid oxide fuel cells: A review
As an excellent source of sustainable green energy, solid oxide fuel cells (SOFCs) become
a compelling energy conversion and storage device which has been attractive to …
a compelling energy conversion and storage device which has been attractive to …
High performance Ca-containing La2-xCaxNiO4+ δ (0≤ x≤ 0.75) cathode for proton-conducting solid oxide fuel cells
CY Gu, XS Wu, JF Cao, J Hou, LN Miao, YP Xia… - International Journal of …, 2020 - Elsevier
In order to optimize the performance of La 2 NiO 4+ δ materials as H–SOFC cathodes,
different Ca doping amounts (x= 0, 0.25, 0.5, 0.75) is adopted to find the best solution …
different Ca doping amounts (x= 0, 0.25, 0.5, 0.75) is adopted to find the best solution …
In Situ Exsolved CoFe Alloy Nanoparticles on Gd2SrCo0.8Fe1.2O7−δ for Direct Hydrocarbon Fuel Solid Oxide Fuel Cells
K Li, T Tan, C Yang, Z Liao, J Yang - Energy & Fuels, 2024 - ACS Publications
A Ni-free solid oxide fuel cell (SOFC) ceramic anode composed of CoFe alloy (CFA)
nanoparticles evenly dispersed in porous Ruddlesden–Popper-type layered oxide …
nanoparticles evenly dispersed in porous Ruddlesden–Popper-type layered oxide …
A microstructure-oriented mathematical model of a direct internal reforming solid oxide fuel cell
A standard fuel cell requires hydrogen for operation; however, to achieve near-term
applications fuel cells need to use the existing infrastructure and already available fuels …
applications fuel cells need to use the existing infrastructure and already available fuels …
Synthesis and surface characterization of the La0. 7-xPrxCa0. 3MnO3 (LPCM) perovskite by a non-conventional microwave irradiation method
AC Ferrel-Álvarez, MA Domínguez-Crespo… - Journal of Alloys and …, 2018 - Elsevier
Abstract A series of La 0.7-x Pr x Ca 0.3 MnO 3 (x= 0.35, 0.52 or 0.63) perovskites were
synthesized using microwave method at different reaction times (3, 4 and 5 min) as possible …
synthesized using microwave method at different reaction times (3, 4 and 5 min) as possible …
Insight of novel layered perovskite PrSrMn2O5+ δ: a neutron powder diffraction study
Neutron diffraction is very important to characterizing complex oxide materials, especially for
the light element position and occupancy. In this study, a new layered perovskite oxide …
the light element position and occupancy. In this study, a new layered perovskite oxide …
NdBaMn2O5+ δ layered perovskite as an active cathode material for solid oxide fuel cells
A layered perovskite, NdBaMn 2 O 5+ δ (NBMO), was synthesized by solid state reaction
method in air. Rietveld analysis of X-Ray Diffraction (XRD) data showed the material …
method in air. Rietveld analysis of X-Ray Diffraction (XRD) data showed the material …