This article reviews original work and important new developments in the field of
deformation behavior of high manganese face-centered cubic γ-Fe alloys. Owing to their …

Despite having otherwise outstanding mechanical properties, many single-phase medium
and high entropy alloys are limited by modest yield strengths. Although grain refinement …

Investigations of the behavior of ultrafine‐grained (UFG) materials manufactured by severe
plastic deformation (SPD) have been greatly motivated by the expectations that they may …

In this work, a high-manganese Fe–23Mn–1.5 Al–0.3 C Twinning-Induced Plasticity (TWIP)
steel was subjected to plastic shear deformation using Equal-Channel Angular Pressing …

The microstructure evolution in an Fe–17Mn–1.5 Al–0.3 C steel processed by cold rolling
with subsequent annealing was studied. Cold rolling was accompanied by a significant …

The development of microstructure and texture of twinning-induced plasticity (TWIP) steel
sheet during ECAP at two temperatures (250° and 350°) up to four passes were …

The microstructural evolution of twinning-induced plasticity steel during high-pressure
torsion (HPT) processing at 573 K was systematically evaluated. Due to the high processing …

In this study, the co-deformation behavior of Cu in an Al-Cu couple was evaluated. It is
observed that slip, twinning, and partial shear banding were responsible for deformation in …

Mechanical properties of three high-Mn steels, Fe-18Mn-0.6 C-1.5 Al, Fe-23Mn-0.3 C-1.5 Al,
Fe-18Mn-0.3 C-1.5 Al, were characterized and discussed with respect to the content of the …

Abstract Effects of reduced (–40° C), ambient (20° C), and elevated (200° C) deformation
temperatures on the microstructure evolution and strain hardening behavior of two low-C …