Partial slip texture slider and journal bearing lubricated with Newtonian fluids: a review

A Senatore, T Rao - Journal of Tribology, 2018 - asmedigitalcollection.asme.org
Partial slip texture surfaces have proven to be effective to improve load capacity and reduce
coefficient of friction in slider and journal bearings. By controlling the partial slip surface …

Effect of compound dimple on tribological performances of journal bearing

FM Meng, L Zhang, Y Liu, TT Li - Tribology International, 2015 - Elsevier
The effect of the compound dimple on the tribological performances of a journal bearing is
studied. In doing so, the tribological performances for the bearing with the compound dimple …

[PDF][PDF] 织构化表面优化设计及应用的研究进展

李强, 刘清磊, 杜玉晶, 李斌, 王玉君, 许伟伟 - 中国表面工程, 2021 - qikan.cmes.org
作为改善摩擦表面界面性能的有效途经, 表面织构现已成为摩擦学领域和表面工程领域的研究
热点之一, 但是表面织构的机理研究以及织构优化设计体系尚未完善. 首先从表面织构的承载 …

Effect of rectangular rough dimples of textured surface on tribological behavior of a hydrodynamic journal bearing

YA Masmoudi, AB Chaouche, A Mokhtari - Tribology International, 2023 - Elsevier
The geometry and location of the textures can affect the hydrodynamic bearing and
coefficient of friction for the journal bearing case. The present study deals with the analysis …

Performance improvement of water-lubricated thrust pad bearing operating with the turbulent flow using a new micro-pocket design

JC Atwal, RK Pandey - Tribology International, 2021 - Elsevier
This paper reports an explorations carried out on the performance parameters (minimum film
thickness, friction coefficient, and bearing dynamic coefficients) of a sector-shaped pad …

Numerical optimization of the groove texture bottom profile for thrust bearings

W Wang, Y He, J Zhao, Y Li, J Luo - Tribology International, 2017 - Elsevier
Most of the previous studies on the surface texture were based on pre-determined shapes
and distributions, and the global-optimum shapes were uncertain. In this paper, a general …

Optimizing the tribological performance of textured piston ring–liner contact for reduced frictional losses in SI engine: Warm operating conditions

A Usman, CW Park - Tribology International, 2016 - Elsevier
Abstract Development in surface modifications has shown promising outcomes in improving
the tribological performance of contacts in hydrodynamic, mixed, and boundary lubrications …

Influence of texture geometries on the performance parameters of hydrodynamic journal bearing

N Singh, RK Awasthi - Proceedings of the Institution of …, 2021 - journals.sagepub.com
The operating and geometric parameters of textures affect the static, dynamic, and stability
performance characteristics of a journal-bearing system. The present work investigates the …

Numerical and experimental investigation of texture shape and position in the macroscopic contact

A Codrignani, B Frohnapfel, F Magagnato… - Tribology …, 2018 - Elsevier
In this work, the influence of operating conditions on the shape parameters of surface texture
is investigated by means of both numerical and experimental investigations. The analysed …

Influence of surface texturing on the hydrodynamic performance of a thrust bearing operating in steady-state and transient lubrication regime

A Gherca, A Fatu, M Hajjam, P Maspeyrot - Tribology International, 2016 - Elsevier
This paper presents a finite element modeling of hydrodynamic thrust bearings operating
both in steady-state and transient lubrication regime. The presented numerical algorithm is …