Non-contact water level monitoring system implemented using LabVIEW and Arduino
RM Shrenika, SS Chikmath, AVR Kumar… - … conference on recent …, 2017 - ieeexplore.ieee.org
This paper shows non-contact water level monitoring system implemented using LabVIEW
and arduino. Water depth of the tank is measured by Ultrasonic sensor. Hence the water …
and arduino. Water depth of the tank is measured by Ultrasonic sensor. Hence the water …
Tide variation monitoring based improved GNSS-MR by empirical mode decomposition
Abstract Global Navigation Satellite System multipath reflectometry (GNSS-MR) technology
has great potential for monitoring tide level changes. GNSS-MR techniques usually extract …
has great potential for monitoring tide level changes. GNSS-MR techniques usually extract …
Coastal sea-level measurements based on gnss-r phase altimetry: A case study at the onsala space observatory, sweden
W Liu, J Beckheinrich, M Semmling… - … on Geoscience and …, 2017 - ieeexplore.ieee.org
The characterization of global mean sea level is important to predict floods and to quantify
water resources for human use and irrigation, especially in coastal regions. Recently, the …
water resources for human use and irrigation, especially in coastal regions. Recently, the …
Smart Home Automation Implemented using LabVIEW and Arduino
SS Tippannavar, N Shivaprasad… - … on Electronics and …, 2022 - ieeexplore.ieee.org
The 21st century is an era of technology. Technology has undoubtedly changed the way of
living. It has an impact on the lives and redefined the fact of living. The smart home can …
living. It has an impact on the lives and redefined the fact of living. The smart home can …
Monitoring a storm surge during Hurricane Harvey using multi-constellation GNSS-Reflectometry
SK Kim, J Park - GPS Solutions, 2021 - Springer
Storm surges, one of the major causes of hurricane damage, lead to an abnormal rapid rise
in water levels of up to a few feet for several minutes due to low pressure, strong winds, and …
in water levels of up to a few feet for several minutes due to low pressure, strong winds, and …
SNR-based water height retrieval in rivers: Application to high amplitude asymmetric tides in the Garonne river
P Zeiger, F Frappart, J Darrozes, N Roussel… - Remote sensing, 2021 - mdpi.com
Signal-to-noise ratio (SNR) time series acquired by a geodetic antenna were analyzed to
retrieve water heights during asymmetric tides on a narrow river using the Interference …
retrieve water heights during asymmetric tides on a narrow river using the Interference …
Land Subsidence Prediction and Analysis along Typical High-Speed Railways in the Beijing–Tianjin–Hebei Plain Area
L Wang, C Zhou, H Gong, B Chen, X Xu - Remote Sensing, 2023 - mdpi.com
High-speed railways in the Beijing–Tianjin–Hebei (BTH) Plain are gradually becoming more
widespread, covering a greater area. The operational safety of high-speed railways is …
widespread, covering a greater area. The operational safety of high-speed railways is …
Application of RNN on GNSS Reflectometry Sea level monitoring
N Limsupavanich, B Guo, X Fu - International Journal of Remote …, 2022 - Taylor & Francis
ABSTRACT Global Navigation Satellite System reflectometry (GNSS-R) can be used to
monitor the sea level with the signal-to-noise ratio (SNR) using the spectral analysis …
monitor the sea level with the signal-to-noise ratio (SNR) using the spectral analysis …
Snow depth estimation from GNSS SNR data using variational mode decomposition
Abstract In recent years, Global Navigation Satellite System-Interferometric Reflectometry
(GNSS-IR), a new remote sensing technique, has been widely used to monitor surface …
(GNSS-IR), a new remote sensing technique, has been widely used to monitor surface …
Improvement of coastal sea-level altimetry derived from GNSS SNR measurements using the SNR forward network and T-LSTM anomaly detection
N Limsupavanich, B Guo, X Fu - IEEE Transactions on …, 2022 - ieeexplore.ieee.org
In the global navigation satellite system reflectometry (GNSS-R), the spectral analysis
approach is widely used to derive sea-level height from signal-to-noise ratio (SNR) data …
approach is widely used to derive sea-level height from signal-to-noise ratio (SNR) data …