Effects of channel geometry and electrode architecture on reactant transportation in membraneless microfluidic fuel cells: A review
The review article introduces the development in membraneless microfluidic fuel cells
(MMFCs) focusing on the microchannel geometry and electrode architecture and …
(MMFCs) focusing on the microchannel geometry and electrode architecture and …
Recent development of Pd-based electrocatalysts for proton exchange membrane fuel cells
H Meng, D Zeng, F Xie - Catalysts, 2015 - mdpi.com
This review selectively summarizes the latest developments in the Pd-based cataysts for low
temperature proton exchange membrane fuel cells, especially in the application of formic …
temperature proton exchange membrane fuel cells, especially in the application of formic …
Enhancing fuel transport in air-breathing microfluidic fuel cells by immersed fuel micro-jet
Air-breathing microfluidic fuel cells with flow-over planar anodes can facilitate system
integration but suffer from the fuel concentration boundary layer over the anode, which …
integration but suffer from the fuel concentration boundary layer over the anode, which …
Simply prepared α-Ni (OH) 2-based electrode for efficient electrocatalysis of EOR and OER
HS Abdel-Samad, MA El-Jemni, SS Abd El Rehim… - Electrochimica …, 2024 - Elsevier
As one of the most efficient Ni phases towards ethanol oxidation reaction (EOR), α-Ni (OH) 2
is aimed to be simply prepared. Various α-Ni (OH) 2-rich deposits are obtained …
is aimed to be simply prepared. Various α-Ni (OH) 2-rich deposits are obtained …
A dual-functional three-dimensional herringbone-like electrode for a membraneless microfluidic fuel cell
Carbon fibers (CFs) due to their excellent electrochemical properties, large specific surface
area as well as good flexibility have received much attention for flexible energy harvesting …
area as well as good flexibility have received much attention for flexible energy harvesting …
Air-breathing direct formic acid microfluidic fuel cell with an array of cylinder anodes
An air-breathing direct formic acid membraneless microfluidic fuel cell using graphite
cylinder arrays as the anode is proposed. The three dimensional anode volumetrically …
cylinder arrays as the anode is proposed. The three dimensional anode volumetrically …
Electrocatalytic CO2 Reduction to Formate at Low Overpotentials on Electrodeposited Pd Films: Stabilized Performance by Suppression of CO Formation
Palladium nanoparticles are effective for catalytic CO2 reduction. However, CO, one of the
most important products in the CO2 reduction sequence, has strong affinity for the Pd …
most important products in the CO2 reduction sequence, has strong affinity for the Pd …
Improving the electrochemical properties of carbon paper as cathodes for microfluidic fuel cells by the electrochemical activation in different solutions
C Liu, C Sun, Y Gao, W Lan, S Chen - ACS omega, 2021 - ACS Publications
Membraneless microfluidic fuel cells (MFCs) have garnered tremendous interest as
micropower devices, which exploit the colaminar nature of two aqueous electrolytes to …
micropower devices, which exploit the colaminar nature of two aqueous electrolytes to …
Route towards high-performance microfluidic fuel cells: a review
In the past twenty years, membrane-less microfluidic fuel cells (M-MFCs) have undergone a
rapid development as emerging chip-based power sources. They possess enormous …
rapid development as emerging chip-based power sources. They possess enormous …
Cyclic voltammetry electrodeposition of well-dispersed Pd nanoparticles on carbon paper as a flow-through anode for microfluidic direct formate fuel cells
The preparation of low-loading and high-performance Pd-based electrodes is required for
direct formate fuel cells. In this study, cyclic voltammetry electrodeposition is used to …
direct formate fuel cells. In this study, cyclic voltammetry electrodeposition is used to …