This review is divided into three main sections. The first section of this overview examines in
detail recent techno-economic analyses on the utilization of biomass as a source of syngas …

Fischer–Tropsch synthesis (FTS) is considered as one of the non-oil-based alternatives for
liquid fuel production. This gas-to-liquid (GTL) technology converts syngas to a wide range …

Methods for the hydrogenation of CO2 into valuable chemicals are in great demand but their
development is still challenging. Herein, we report the selective hydrogenation of CO2 into …

Co3O4 supported on ZSM-5 (Co3O4/ZSM-5) catalysts were prepared by impregnation (IM),
deposition precipitation (DP), and hydrothermal (HT) methods. Their catalytic performances …

Platinum-group metals are widely used as diesel oxidation catalysts (DOCs) for exhaust
control. It is a challenge to improve performance and reduce the cost of DOCs, while also to …

Nanostructured materials play an important role in today's chemical industry, acting as
catalysts in heterogeneous thermal and electrocatalytic processes for chemical energy …

The influence of the metal selected as catalytic active phase in the two-step biomass
pyrolysis-catalytic reforming strategy has been analyzed. The pyrolysis step was carried out …

The bulk of the products that were synthesized from Fischer–Tropsch synthesis (FTS) is a
wide range (C1–C70+) of hydrocarbons, primarily straight-chained paraffins. Additional …

Propane dehydrogenation is a highly efficient and selective route to produce propylene. The
development of transition-metal-based catalysts, especially cobalt oxide–Co (II) for propane …

Abstract The test (Co 3 O 4) and two control cobalt oxides (CoO and Co 2 O 3) were the
study materials of the present investigation. The test oxide was a high purity (≥ 99%) …